Philips owner manual MDV421SL only

Hookups (cont’d) 13

Connecting to a TV Only

TV has Component Video In Jacks (red, green, and blue)

MDV421SL ONLY

1

3

Back of TV

(example only)

Pr/Cr	RIGHT AUDIO IN
Pb/Cb	LEFT AUDIO IN
Y

2

Connect the DVD Player’s Y Pb Pr (VIDEO OUT) jacks to
the corresponding COMPONENT VIDEO IN jacks on the
1 TV. Use component video cables (not supplied).
Connect the DVD Player’s red and white AUDIO OUT jacks
to the left/right AUDIO IN jacks on the TV. Use the supplied
2 audio cables. Match the cable colors to the jack colors.
Plug the power cords of the DVD Player and the TV into an
active power outlet. Press STANDBY-ON y on the front of
3 the DVD Player to turn it on.
Turn on the TV. Set it to the correct Component Video In
channel. See your TV owner’s manual for details. Or, go to your
4 lowest TV channel (01 or 02) and change channels downward until
you see the blue DVD screen saver on the TV.
	Helpful Hint
	• On the TV, the component video
	in jacks may be labeled YUV or
	Pr/Cr Pb/Cb Y and may be
	green, blue, and red.
	• If your TV has a single Audio In
	jack instead of separate
	left/right Audio In jacks, you will
	need a different audio cable.
	You need a “splitter” audio
	cable to go from the left/right
	AUDIO OUT jacks of the DVD
	Player to the single Audio In
	jack on your TV. See your
	electronics retailer for details.