Monitor Display modes
VGA | 640x480 | 60, 72, 75, 85 Hz | When a VGA computer is connected, the |
Wide VGA | 848x480 | 60 Hz | display selection is made automatically. |
Wide VGA | 852x480 | 60 Hz |
|
MAC | 640x480 | 66.67 Hz | A message is displayed when the monitor does |
MAC | 832x624 | 74.55 Hz | not support the connected VGA mode. Switch |
MAC | 1024x768 | 74.93 Hz | your computer to a correct display mode. |
MAC | 1152x870 | 75 Hz |
|
SVGA | 800x600 | 56, 60, 72, 75, 85 Hz |
|
XGA | 1024x768 | 60, 70, 75, 85 Hz |
|
SXGA | 1280x1024 | 60, 72 Hz |
|
Operation
&Insert the mains plug supplied into the mains inlet at the back of the monitor and in the wall socket.
For safety, please, only use the supplied
éRemote control: remove the cover of the battery compartment.
Insert the 2 batteries supplied (Type R6/AA- 1.5V).
R6 / AA
The batteries supplied do not contain the heavy metals mercury and cadmium. Nevertheless in many countries batteries may not be disposed of with your household waste. Please check on how to dispose of batteries according to local regulations.
“Make sure that your electronic receiver box and/or PC are switched on and that your PC is in the correct display mode.
‘Switch the monitor on : Press the on/off key B at the right side of the monitor.
A green indicator lights up and the screen comes on.
B
When the monitor does not receive a supported VGA signal and is not connected to a receiver box, the screen switches to standby and the red indicator lights up.
When you switch on your monitor for the first time, and the monitor is not connected to an electronic receiver box, the language menu automatically appears on the screen. The explanation appears in different languages one at a time.
Follow the instructions on screen to select the correct language or see Setup menu, Language, p. 5.
2