Philips MCD716 quick start Setting the clock, Setting DVD menu options

Setting the clock

1

In standby mode, press and hold CLOCK on the remote.

2

When the hour digits flash, turn VOLUME-/+on the system or press VOL +/- on the remote to set the hours.

3

Press CLOCK again and the minute digits flash.Then turn VOLUME-/+on the system or press VOL +/- on the remote to set the minutes.

4

Press CLOCK again to confirm the time setting.

Setting DVD menu options

IMPORTANT!

If the progressive scan feature is activated but the connected TV does not support progressive signals or the cables are not connected accordingly, see the user manual for proper progressive scan setup or deactivate the progressive scan feature as below:

1)Turn off your TV progressive scan mode or turn on to interlaced mode.

2)Press SYSTEM MENU on the remote to exit the system menu and then DISC and “1” to exit progressive scan.

DIGITAL AUDIO SETUP

3D

DIVX (R) VOD

PICTURE SETTING

Tip

See chapters "Getting Started" and "System Menu Options" in the

User Manual for detailed descriptions.