Philips LX3700D manual AD905W Wireless System Only for LX3750W

AD905W Wireless System (Only for LX3750W)

The AD905W accessory gives you the option for wireless speaker connection.

Please check you have all the supplied parts for your AD905W wireless set:

–1 x AD905WT WIRELESS TRANSMITTER

–1 x AD905WA WIRELESS RECEIVER

–1 x 14V adapter

–1 x table stand

1Remove the PHILIPS cover from the AD905WA WIRELESS RECEIVER as shown in Fig. 1, to access the connection terminal. Connect your rear speaker terminals with the corresponding color terminals on the AD905WA

WIRELESS RECEIVER

2Insert the table stand into the brackets as shown in Fig.2.

3Connect the AD905WA WIRELESS RECEIVER power cord to your power supply.

4Check / adjust the AD905WA WIRELESS RECEIVER OFF-

ON switch to the ON position (see Fig.1).

➜ The AD905WA WIRELESS RECEIVER power indicator lights up green.

5Connect the 14V power adapter to the AD905WT WIRELESS TRANSMITTER and power supply as shown in Fig.

3.

6Make sure you position both the AD905WT WIRELESS

TRANSMITTER and AD905WA WIRELESS RECEIVER at least

2 meters apart.

7Connect and carefully match the AD905WT WIRELESS

TRANSMITTER inputs to the corresponding surround speaker jacks on your LX3750W DVD system.

➜The AD905WT WIRELESS TRANSMITTER power

indicator lights up red.

8Check and adjust the 4-channel toggle switch on the

AD905WT WIRELESS TRANSMITTER and AD905WA

WIRELESS RECEIVER (CHANNEL SELECTOR switch),

so that both units are using the same channel.

9On your LX3750W DVD system, play an audio source and activate the surround sound mode option. Adjust the volume to reproduce surround sound in the rear speakers.

10Extend the antenna vertically on both the AD905WT

WIRELESS TRANSMITTER and AD905WA WIRELESS

RECEIVER to improve reception. Check the antennas are safely positioned without obstruction.

To ensure quality sound production and transmission

Connections

●Place both the AD905WT WIRELESS TRANSMITTER and AD905WA WIRELESS RECEIVER off the ground

(recommended minimum height of 30cm).

●Avoid placing the AD905WT WIRELESS TRANSMITTER too

close to your DVD receiver, AC power adapter,TV or other electrical equipment as it may cause electrical interference.

●In case of sound distortion, please select another channel

for both the AD905WA WIRELESS RECEIVER and AD905WT WIRELESS TRANSMITTER. The distortion could

be the result of interference caused by other equipment using same frequency channel in your house or neighbourhood.

Notes

–After you switch off your DVD system, the AD905WT WIRELESS TRANSMITTER automatically enters standby mode and the red power indicator eventually comes out. On receiving an incoming audio signal from your DVD system again, the AD905WT WIRELESS TRANSMITTER automatically powers up.

–When the AD905WA WIRELESS RECEIVER enters the Eco- power standby mode, the power indicator lights up red.

1

2

3

1 4

English

CONNECTIONS 13