Step B Setup
Setting the clock
IMPORTANT!
–To set clock in the Eco Power mode, press and hold
3 seconds or more to switch to normal standby mode first before proceeding with the procedures below.
1
In standby mode, press and hold CLOCK on the remote control.
2
When the hour digits flash, press
3
Press CLOCK again and the minute digits flash.Then press
4
Press CLOCK again to confirm the time setting.
Setting DVD menu options
IMPORTANT!
If the progressive scan feature is activated but the connected TV does not support progressive signals or the cables are not connected accordingly, see the user manual for proper progressive scan setup or deactivate the progressive scan feature as below:
1)Turn off your TV progressive scan mode or turn on to interlaced mode.
2)Press SYSTEM MENU on the remote to exit the system menu and then DISC and “1” to exit progressive scan.
| |
ANALOG AUDIO SETUP | SLOW |
DIGITAL AUDIO SETUP |
|
| PICTURE SETTING |
3D |
|
DIVX (R) VOD |
|
| ANGLE |
| DISPLAY |
| MUTE |
Tip
See chapters "Get started" and "Adjust settings" in the User Manual for detailed descriptions.
RDS