Philips HTS5110 user manual Troubleshooting, Main unit, Picture, Sound

Page 17

Main Unit

•• Power supply: 27 Vdc; 2.5 A (External switching power adapter)

•• Power consumption: 35 W

•• Standby power consumption: < 1 W

•• Impedance: 8 ohm woofer, 8 ohm tweeter

•• Speaker drivers: 3” woofer, 1.5” tweeter

•• Frequency response: 150 Hz ~ 20 kHz

•• Dimensions (WxHxD): 790.6 x 100.3 x 50 (mm)

•• Weight: 1.5 kg

Switching power adapter (G721DA-270250)

•• Input: 100-240 Vac; 50-60 Hz; 1.35 A

•• Output: 27 Vdc; 2.5 A Subwoofer

•• Power supply: 220-240 V; ~50 Hz

•• Power consumption: 35 W

•• Standby power consumption: < 1 W

•• System: Bass Reflex System

•• Impedance: 8 ohm

•• Speaker driver: 6” woofer

•• Frequency response: 35 Hz ~ 200 Hz

•• Dimensions (WxHxD): 182 x 365 x 306 (mm)

•• Weight: 6 kg Wall Mount

•• Dimensions (WxHxD): 440 x 60 x 23 (mm)

•• Weight: 0.54 kg

9 Troubleshooting

Warning

•• Risk of electric shock. Never remove the casing of the product.

To keep the warranty valid, never try to repair the product yourself.

If you have problems using this product, check the following points before you request service. If you still have a problem, register your product and get support at www.philips.com/welcome.

If you contact Philips, you will be asked for the model and serial number of your product.The model number and serial number are on the back or bottom of your product.Write the numbers here:

Model No. __________________________

Serial No. ___________________________

Main unit

The buttons on this home theater do not work.

•• Disconnect the home theater from the power outlet for a few minutes, then reconnect.

Picture

No picture.

•• Ensure that the TV is switched to the correct source for the home theater.

No picture on HDMI connection.

•• Check if the HDMI cable is faulty. Replace with a new HDMI cable.

Sound

No sound from subwoofer

1

In Standby, press and hold

 

(Stop) on the

 

 

 

remote control until [PAIRING] flashes on

2

the main unit.

Press and hold PAIR on the subwoofer

 

until the blue and green indicators on the

3

subwoofer flash alternately.

If the wireless connection succeeds, [PAIR

OK] is displayed and the green indicator on the subwoofer lights up.

E n g l i s h

EN 15

Image 17
Contents HTS5110 Page Contents Compliance CopyrightMains fuse UK only TrademarksDisposal of your old product and batteries SafetyProduct care Main unit Your home theaterSource SurroundRemote control Connect your home theater ConnectorsBack AudioOption 1 Connect to the TV through Connect to the TVOption 2 Connect to the TV through composite video Cvbs Option 3 Connect to the TV throughOption 1 Connect audio through a digital coaxial cable Connect audio from TV or other devicesChoose your sound Use your home theaterBefore you start Play from a USB storage device More play features for USBSynchronize audio with video Play from an MP3 player Play from radioUse Philips EasyLink Repeat play a specific sectionAccess the setup menu Change settingsChange audio settings Change general settingsChange video settings Change preference settingsUpdate software from a USB storage device Update softwareCheck software version USBMain unit TroubleshootingPicture SoundMP3 IndexPlay Software update Video Synchronize with audio Language Code