Philips HTS3545/98 quick start Connect, Set up

1Connect

APlacement

Proper speakers system placement is important to ensure optimum sound performance.

REAR	FRONT
LEFT	LEFT	CENTER
			FRONT
			RIGHT

RIGHT	SUBWOOFER
REAR

APlace the center speaker above or close to the TV.

BPlace the subwoofer on the floor, at least one meter away from the TV.

CPlace the front speakers at equal distances from the TV.

DPlace the rear speakers at the back or beside the listening position.

BConnect the main unit to TV

Television

VIDEO IN( rear)

(CVBS)

VIDEO IN

(CVBS)

	DOCK
CVBS	VIDEO OUT
	Pr
	Main Unit (rear)
	Pb
S-VIDEO	COAXIAL

zConnect a composite video cable (supplied) from the CVBS jack on the main unit to the VIDEO IN jack on your TV.

Note It is important to connect the main unit directly to your TV.

CConnect the speakers and subwoofer

Connect the various coloured plugs from the speakers and subwoofer to the same coloured sockets at the rear of the main unit.

SUBWOOFER

	FRONT CENTRE
FRONT	FRONT	REAR	REAR
RIGHT	LEFT	RIGHT	LEFT

Main Unit (rear)

SPEAKERS

AM/

MW

DConnect the radio antennas

Keep the antennas away from the electronic devices to prevent unwanted interference.

FM antenna

A

Main Unit (rear)

B

AM/MW antenna

AConnect the FM antenna to the inner pin of the FM 75 ￿ jack. For optimum reception, extend the wire and fix its end to the wall.

BUnfold the AM/MW loop antenna and fix the claw into the slot. Push the tabs and insert the wires into the AM/MW jacks.

CConnect the power cable from the main unit to the AC power outlet.

EConnect audio output from TV (optional)

To hear the TV audio through this home theater system, use a red and white audio cables (not supplied) to connect the AUDIO IN-TV jacks on the main unit to the AUDIO OUT jacks on your TV.

Television	OUT
	AUDIO
( rear)

AUDIO OUT

AUDIO

OUT

AUDIO IN

Main Unit (rear)

Note Press TV on the remote control to get the sound output from the speakers system when watching the TV programs.

2Set up

AFinding the viewing channel

APress 2 (STANDBY ON) on the main unit to turn it on.

BTurn on the TV. Use the TVs remote control to select the correct viewing channel.

STANDBY-ON

Note To search for the correct viewing channel, press the Channel Down button on the TVs remote control repeatedly (or AV, SELECT, ° button) until you see the Video In channel.

BSelect the display language on the screen

APress SETUP.

The { General Setup Page } appears.

General Setup Page

Disc Lock	English
Display Dim
Program
OSD Language	Melayu
Screen Saver	Русский
Sleep	•••
DivX(R) VOD Code

B	Press	to select { OSD Language } and press .
C Use		keys to select a language option in the
	menu and press OK to confirm.

DPress SETUP to exit.

SETUP	Note The language set here is only for the menus
	that are shown on the TV while operating this Home
	Theater system, not for the DVD disc menu.

There are various setup options (Audio Setup, Video Setup, Preference Setup) available on this Home Theater System. Refer to the user manual for more information.