Philips SVD101AT99 owner manual Hookups, DVD Player

Page 8

8 Hookups

You may connect the DVD Player several different ways, depending on your existing equipment and your pref- erences for sound and picture quality. To determine which hookup is best for you, examine the options on the following pages, then see which best matches your situation. Before you hook up the DVD Player, remember:

Connect the DVD Player directly to a TV. If you connect the DVD Player to a VCR, then connect the VCR to the TV, the picture may be distorted by the copyright protection system.

Turn off the power of all equipment before making any connections.

Refer to the owner’s manuals of your other equipment for additional information.

Depending on your connection, you may need to purchase additional cables.

If you do not connect the DVD Player to a Dolby Digital or DTS Decoder, set DOLBY DIGITAL and DTS to OFF on the DVD Player. Details are on pages 11 and 38-39.If you play a DVD when the settings are wrong, the sound will be distorted or you may damage the speakers.

Connecting the DVD Player to a TV only (no stereo or amplifier) TV has AUDIO (red and white) and VIDEO (yellow) IN jacks

VIDEO IN

LEFT AUDIO IN

RIGHT AUDIO IN

1

DIGITAL AUDIO OUT

AUDIO OUT

PCM/BITSTREAM

 

 

COAXIAL

VIDEO R

L

S-VIDEO

OUT

OUT

 

2 1 DVD Player

Back of TV

(example only)

Connect the red and white audio cables to the red and white AUDIO OUT jacks on the DVD Player and to the red and white AUDIO IN jacks on the TV, matching the cable colors to the jack colors.

2

Connect the yellow video cable to the VIDEO OUT jack on the DVD Player and to the VIDEO IN jack on the TV.

3

Connect the TV’s power cord to a power outlet.

Turn on the TV and set it to the Audio/Video In channel, which also may be referred to as A/V In or Auxiliary In. This channel usually is located in the vicinity of channel 00. See your TV owner’s manual for details.

4

Connect the DVD Player’s power cord to a power outlet.

Press the POWER button to turn on the DVD Player. “HELLO” will appear briefly on the DVD Player’s display panel. You should see the DVD logo on the TV screen. If you do not, check your connections and make sure the TV is set to the cor- rect Audio/Video In channel.

Image 8
Contents Digital Video Disc Player Warranty Verification For Customer UseSafety Information Table of Contents Introduction Playable Discs Playable DiscsRegion Codes Color SystemsRemote Control Setup Putting Batteries in the Remote ControlUsing the Remote Control Recycling Guidelines/Battery SafetyHookups DVD PlayerHookups cont’d DVD PlayerConnecting to a TV and a Stereo Connecting to a Dolby Digital Decoder or DTS Decoder Back of TV Example only DVD Player DVD Player Display Display MessagesDisplay Disc loading trayFront Panel Coaxial Jack AC Power Cord Audio OUT JacksRear Panel Remote Control Buttons Title ButtonReturn Button Subtitle ButtonPlaying a Disc Playing a DVD or an Audio CDBefore you begin Press the OPEN/CLOSE button to open the Disc trayUsing the DVD Menus Using the Title MenuPausing Playback Where playback stoppedMemory On Resuming playback from the pointStep by Step Playback Fast Forward/Reverse Search Press the Play button to return to normal playbackSlow Motion Press the PAUSE/STILL button during playbackTrack Playback Starting Playback at a Specific TrackStarting Playback at a Specific Title/Chapter When playback is stopped, press the Number buttons toTitle/Chapter Playback Starting Playback at a Specific Disc Time Press the Search Mode button repeatedly three timesSpecific Time Playback Repeat Playback 42-4 B Repeat PlaybackProgrammed Playback Random Playback While the Random screen appears, press the Play butSound Mode DVD LanguageSubtitle Language Subtitle menu will disappear after about 15 secondsCamera Angles Press the Number buttons to enter the 4-digit password Parental Lock PasswordWhile playback is stopped, press the Setup button. Press the Number 1 button to select Level Press the Number buttons to enter your 4-digit passwordParental Lock Levels Accessing the Status Display Status DisplayVideo Settings Press the Number 2 button to select VideoAudio Settings Go to to change these settingsPress the Number 3 button to select Audio Press the corresponding Number button to select anAudio Settings cont’d Language Settings Press the Number 1 button to select LanguageLanguage Settings cont’d Press a Number button to select a settingLanguage Settings cont’d Language Country CodeOther Menu Settings Press the Number 5 button to select OthersHelpful Hints Helpful Hints cont’d Care and Maintenance Cleaning the DVD PlayerCleaning a Disc Checking the LaserGlossary Specifications Renewed Index 38-39Page Supplied Accessories