Philips HTS4600/12 manual Activate EasyLink control, Map the audio inputs to, Connected devices

Activate EasyLink control

This feature is only applicable if this unit is connected to HDMI CEC compliant TV/device. It enables all the linked devices response or react to certain commands simultaneously with one touch control.

1 Turn on the HDMI CEC operations on your TV and other connected devices. See TVs/devices manual for details.

2 You can now enjoy the EasyLink controls.

One touch play [ Auto Wake-up TV ] When you press PLAY button, this unit will wake- up from standby mode and start disc play (if a video disc is found in the disc compartment) and it will also turn on your TV and switch to the correct viewing channel.

One touch power off [ System Standby ] When you press and hold STANDBY button, it will turn off this unit and all the linked devices to standby.

This unit also responses to standby command from other HDMI CEC devices.

One touch audio input switching [ System Audio Control ]

This unit is able to render the audio signals from the active source. It switches automatically to the corresponding audio input and output the sound from its speaker system.

•Before you can enjoy this function, you have to map the audio inputs to the connected devices.

•You can use any HDMI CEC TV/device remote control to adjust the volume.

		Note
			English
•	To enable one touch play function, a video disc must
	be placed in the disc compartment before operation.
• Philips does not guarantee 100% interoperability
	with all HDMI CEC compliant devices.
			started
Map the audio inputs to the
connected devices			Get

Note

•Before you start, ensure that an audio connection has been made between this unit and your TV/ devices.

1 Press DISC.

2 Press OPTIONS.

3 Press V to select [ Video Setup ] in the menu, then press B.

4 Select [ HDMI Setup ] > [ EasyLink ], then press OK.

EasyLink

Auto Wake-up TV

System Standby

System Audio Control

HDMI Input Mapping

•[ Auto Wake-up TV ] and [ System Standby ] functions are turned on by default in the factory.

5 Select [ System Audio Control ] > [ On ], then press OK.

6 Select [ HDMI Input Mapping ], then press OK.

EN 21