Philips BDP3300K user manual Karaoke, Use Philips EasyLink, Control your player

Connect your smartphone to the same home network (see the user manual of the smartphone for details).

Turn on this player

Control your player

Use a smartphone to browse, control and play

1Insert a data disc or USB storage device into this player.

2On your smartphone, tap the MyRemote icon from the home screen.

»The name of this player is displayed on the smartphone.

3Select this player from the smartphone screen.

»The smartphone used as a virtual remote control is enabled.

4On the smartphone, tap the Media (Media) tab, and then select the disc or USB source.

»The folders in the data disc or USB storage device are displayed.

5

To access the remote control, return to the previous smartphone screen, and then tap the Remote (Remote) tab. Only the relevant control buttons are enabled.

6Tap the control buttons on the smartphone to control play.

To access more control buttons, swipe the screen to the left or right.

To exit the application, press the home button on the smartphone.

Karaoke

1Connect a microphone (not supplied) to the MIC connector on this player.

2Pressto display the home menu.

3Select [Setup] > [Audio] > [Karaoke], and

press OK.

» The Karaoke menu is displayed.

4Select [Microphone] > [On], and press OK to turn on the microphone sound output.

5Play a disc, and then sing through the microphone.

Set up Karaoke via the Karaoke menu [Microphone]:Turn on or off microphone sound output.

[Microphone volume]: Change the microphone volume.

[Echo]: Change the echo level.

[Key]: Change the pitch level that matches your voice.

Original vocal for Karaoke

Press repeatedly AUDIO on the remote control until the original vocal is turned off. Complete cancelation of the original vocal is disc dependent.

Use Philips EasyLink

This player supports Philips EasyLink which uses the HDMI CEC (Consumer Electronics Control) protocol.You can use a single remote control to control EasyLink compliant devices that are connected through HDMI. Philips does not guarantee 100% interoperability with all HDMI CEC devices.

1Connect the HDMI CEC compliant devices through HDMI, and turn on the HDMI CEC operations on the TV and other connected devices (see the user manual of the TV or other devices for details).

2Press .

3Select [Setup]> [EasyLink].

4Select [On] under the options: [EasyLink], [One Touch Play] and [One Touch

Standby].

» EasyLink function is turned on.

16EN