Philips 19PFL3205H/12 user manual Sound issues, Hdmi connection issues, Computer connection issues

Page 43

The TV did not save your picture settings:

Check that the TV location is set to the home setting. This mode offers you the flexibility to change and save settings.

The picture does not fit the screen; it is too big or too small:

Try using a different picture format. The picture position is incorrect:

Picture signals from some devices may not fit the screen correctly. Check the

signal output of the device.

Cannot remove ‘e-sticker’ banner displayed on the TV.

To remove the logos and images, set the location of your TV to home.

1.Press MENU.

2.Select [Setup] > [Installation] > [Preferences] > [Location].

3.Select [Home] and press OK.

Sound issues

There is a picture but sound quality is poor:

Note

If no audio signal is detected, the TV automatically switches the audio output off

— this does not indicate malfunction.

Check that all cables are properly connected.

Check that the volume is not set to 0.

Check that the sound is not muted. There is a picture but the sound quality is poor:

Check that the sound settings are

correctly set.

There is a picture but sound comes from one speaker only:

Verify that sound balance is set to the centre.

Downloaded From TV-Manual.com Manuals

HDMI connection issues

There are problems with HDMI devices:

Note that HDCP (High-bandwidth Digital Content Protection) support can delay the time taken for a TV to display content from a HDMI device.

If the TV does not recognise the HDMI device and no picture is displayed, try switching the source from one device to another and back again.

If there are intermittent sound disruptions, check that output settings from the HDMI device are correct.

If you use an HDMI-to-DVI adapter or HDMI-to-DVI cable, check that an additional audio cable is connected to AUDIO (mini-jack only).

Computer connection issues

The computer display on the TV is not stable:

Check that your PC uses the supported resolution and refresh rate.

Set the TV picture format to unscaled.

Contact us

If you cannot resolve your problem, refer to the FAQs for this product at www.philips.com/support. If the problem remains unresolved, contact Philips Consumer Care in your country as listed in the Addendum.

Warning

Do not attempt to repair the product yourself. This may cause severe injury, irreparable damage to your product or void your warranty.

Note

Make a note of your TV model and serial number before you contact Philips. These numbers are printed on the back of the TV and on the packaging.

EN 41

English

Image 43
Contents Page Clientes en España Contents Koninklijke Philips Electronics N.V.All rights reserved English Risk of electric shock or fire SafetyRisk of short circuit or fire Disposal of your old product and batteries Screen careEnvironmental efforts High energy efficiency Low standby powerSource Selects connected devices Side controls and indicatorsRemote control Your TVAD Audio Descriptor For RF Digital TV only Remote control usageSwitch channels with the channel grid Switch your TV on / off or to standby Switch channelsUse your TV Use the source button Adjust TV volumeWatch connected devices Use teletextRemove devices from the home menu Access TV menusUse more of your TV Rename devices from Home menuUse smart picture Change picture and sound settingsUse settings assistant Manually adjust picture settingsChange picture format Following picture settings can be configuredSummary of picture formats Use smart sound Manually adjust sound settingsSelect teletext subpages Use the universal access menuUse advanced teletext features Access the teletext options menuAdd a channel to a favourite list Select T.O.P. teletext broadcastsSelect a favourite list View all channelsUse EPG Switch on EPGUse the Electronic Programme Guide Remove a channel from a favourite listUse the TV clock Automatically switch the TV to standby sleep timer Use timersAutomatically switch the TV on on timer Lock the TV for a specific time Use TV locksSet or change your PIN code Lock or unlock the TVSet parental ratings Enable subtitles on analogue TV channelsEnable subtitles on digital TV channels Use subtitlesView photos Change slide show settingsView a slide show of your photos View a slideshow with music Music settingsListen to digital radio channels Listen to musicUpdate the TV software Press OK Press Menu to exit Access decoder channelChange TV preferences Set decoder channelStart a TV demo Reset the TV to factory settingsAutomatically install channels Install channelsFine-tune analogue channels Manually install channelsSelect your system Search and store new TV channelsRearrange channels Rename channelsTest digital reception When complete, select Store to store the frequencyConnect devices Back connectorPC in VGA and Audio Audio and video input from a computer Side connectorEXT 1 Cvbs and RGB Spdif OUTEnglish VGA cable Connect a computerHdmi cable DVI-HDMI cable Hdmi cable and HDMI-DVI adaptorAccess CAM services Use a Conditional Access ModuleInsert and activate a CAM Use one-touch play EasyLink featuresEnable or disable EasyLink Use Philips EasyLinkUse a Kensington lock Set TV speakers to EasyLink mode Multimedia Supported display resolutions Power Product informationPitch mm Mounting bolts ≤ 10mm 75 x Supported TV mountsProduct specification TV screen RequiredPicture issues TroubleshootingGeneral TV issues TV channel issuesContact us Sound issuesHdmi connection issues Computer connection issuesAnalogue fine-tune Antenna Batteries Bracket for wall mount IndexOverview 41, 31 OAD on timerParental rating Picture sound Radio Rearrange channels reception recycleView with music Page 46 EN Koninklijke Philips Electronics N.V. All rights reserved