Button Functions
1.
Button Functions, cont.
12.1. Red Indicator Lights when any button is pressed.
| 2. | TV, VCR, CBL Selects product to be oper- |
2. | 11. | ated. |
| 3. | CODE SEARCH Used for setup. |
| 4. | NUMBERS Enter numbers for direct channel |
3. | 10. | selection. Some products require Enter to be |
|
| pressed after channel selection. |
4. | 9. |
5.8.
6.7.
Note: The REC button must be pressed TWICE to record from your VCR. For some brands of VCRs, you might need to press the REC button once, then press it again for three seconds.
Some buttons on the remote might have functions that are referred to by different names on the device you are controlling. E.G. PREV.CHAN may be called RECALL, or ENTER may be called DISPLAY. These differences depend on the brand and model of your product. Also, this remote can only operate features that exist on your prod- uct. E.G., your product must have PREV.CHAN ability for the PREV.CHAN button to operate this feature.
5.ENTER Used after direct channel number entry to immediately change to the selected channel.
6.RECORD, PLAY, STOP, REW, FF,
PAUSE
VCR control buttons operate your VCR even when the remote is set to operate the TV.
7.TV/VCR For some TVs, press repeatedly to select from available viewing sources (antenna, cable box, VCR, etc.).
8.PREV. CHAN Returns to the previously selected channel, or DVD repeat toggle.
9.VOLUME UP/DOWN Changes the volume level of the product, normally the TV.
10.MUTE Turns off the TV sound while the picture remains.
11.CHANNEL UP/DOWN Changes the channels.
12.POWER Turns product On or Off.
4 | 5 |