Philips PS1956C1 Hooking UP Your TV Basic Antenna TV Connections, If your antenna has a round

HOOKING UP YOUR TV (BASIC ANTENNA TV CONNECTIONS)

ANTENNA		SMART
combination antenna receives		HELP
Anormal broadcast channels		Remember:
(VHF 2-13 and UHF 14-69).	Note: For homes with separate UHF and VHF antennas	Be sure to set the
Your connection is easy since		TV for the type sig-
	you will need an optional combiner to connect to the TV.
there is only one 75Ω (ohm)		nal you've connect-
antenna plug on the back of your	U/V	ed (see the “Tuner”
		section on page 11
TV - and that’s where the antenna	Combiner
		of this manual.)
goes.
BEGIN		To set the TV to
If your antenna has a round		select only the chan-
cable (75 ohm) on the end, then		nel numbers in your
you're ready to connect it to the TV.	Back of TV	area see how to
If your antenna has flat twin-lead		“Program" or "Add"
wire (300 ohm), you first need to		channels in the TV’s
attach the antenna wires to the screws	75-300 Ohm Adapter	memory on page 12
on a 300 to 75 ohm adapter.		(Auto Program sec-
		tion).
Push the round end of the		To order any option-
adapter (or antenna) onto the 75Ω
plug on the rear of the TV. If the		al accessory contact
		your dealer or the
round end of the antenna wire is
		Philips Parts Center
threaded, screw it down tight.
		at 1-800-851-8885.

75 V

Combination VHF/UHF
Antenna		2
(Outdoor or Indoor)
1	300 to 75Ω
	Adapter	75 V
Twin Lead		VIDEO
		Back of TV
Wire	OR
		L/MONO
Round Cable		AUDIO
75Ω
		R

in

6