Philips PM335 manual Setup

Page 3

Setup

Battery Installation

1. On the back of the remote, push down on the tab and lift the cover off.

2. Match the batteries to the + and - marks inside the battery case, then insert 2

AAA Alkaline batteries.

3.Press the battery cover back into place.

Battery Saver

Your remote automatically times out if the buttons are depressed more than 30 seconds. This will save your batteries should your remote get stuck in a place where the buttons remain depressed (e.g., between the sofa cushions).

Code Saver

You will have up to 10 minutes to change the batteries in your remote without losing codes you have programmed. However, do not press any buttons until batteries are installed in the remote. If buttons are pressed without batteries in the remote, all codes will be lost.

4

Power-On Default

The remote powers on in TV mode.

TV Volume/Mute Punch-Through

The TV Volume/Mute punch-through feature lets you control the Volume and Mute function of your TV in any mode programmed to be a VCR, DVD, or SAT device, without needing to change to TV mode.

VCR/DVD Punch-Through

Punch-through to VCR and DVD mode is only allowed in TV mode. SAT/DBS is dedicated for satellite mode.

Code Setup

The Code Search button is used to setup the remote. You can either setup the remote using the code for your brand of product, from the code tables, or you can search through the library of codes until you find a code that works for your product.

NOTE: You can store any kind of code under any mode (except TV). I.E. you can store a DVD code under the SAT key, or a TV code under the DVD key, etc. However, you can only store TV codes under the TV key.

 

VCR

 

 

DVD

 

TV

 

SAT

 

CHAN+

 

CODE

 

PREV

SEARCH

 

CHAN

Code Search.

MUTE

VOL

 

 

+

 

 

REPEAT

 

CHAN

 

SLEEP

 

SUBTITLE

 

POWER

CC

 

 

PIP

TOGGLE/TITLE

 

5

Image 3
Contents PM335 Universal Remote Insructions Table of Contents Introduction Setup Button Functions, Button FunctionsTV/VCR and TV/DVD Combo units Advanced Button FunctionsTV/DVD Punch-Through MiscCode Entry Direct Code EntryProgramming with Code Search Sleep Timer Code IdentificationCode Identification Hitachi Code ListPioneer Laser DiscProduct Operation TroubleshootingDay Warranty

PM335 specifications

The Philips PM335 is a versatile and reliable device that caters to the needs of both professionals and hobbyists in the world of electronics and testing. With its innovative features and robust technologies, the PM335 delivers accurate measurements and enhanced efficiency, making it a valuable tool in various applications.

One of the standout features of the Philips PM335 is its precision measurement capability. The device is designed to provide accurate readings of voltage, current, resistance, and frequency. Its wide measurement range ensures that it can handle a variety of testing scenarios, from low-power circuits to high-voltage applications. This precision is further enhanced by the use of high-quality components, which minimize error and ensure reliable performance.

In terms of user interface, the PM335 is equipped with an intuitive display that allows users to easily navigate through different measurement modes. The display presents data clearly, making it straightforward for users to take readings and interpret results. The controls are designed for ease of use, enabling quick adjustments without the need for extensive training or technical knowledge.

The PM335 also incorporates advanced measurement technologies, including True RMS capability, which ensures accurate readings of AC signals, even in non-sinusoidal waveforms. This feature is particularly beneficial for users working with modern electronic devices, where signal distortion can lead to misleading measurements. The device also supports various connectivity options, allowing it to be integrated into larger test setups or connected to computers for data logging and analysis.

Another characteristic that sets the Philips PM335 apart is its durability and portability. Crafted with robust materials, the device is built to withstand the rigors of daily use in both laboratory environments and field settings. Its lightweight design ensures that it can be easily transported, making it ideal for technicians on the go.

In conclusion, the Philips PM335 is a well-designed measurement device that excels in precision, ease of use, and durability. Its array of features and advanced technologies makes it an essential tool for anyone involved in electronics testing and troubleshooting. Whether for professional use or personal projects, the PM335 delivers the performance and reliability that users need in today’s fast-paced technological landscape.