Update software, Advanced options clear memory

Advanced options (clear memory...)

1 Press .

2Select [Setup] > [Advanced] to access the advanced setup options.

[BD-Live security]: Restrict or allow access to BD-Live (only for non- commercial, user-created BD-Live discs).

[Downmix mode]: Select 2-channel stereo audio output to a TV or to a receiver with left and right Dolby surround.

[Software update]: Select to update software from a network or from USB storage device.

[Clear memory]: Delete the previous BD-Live download on the USB storage device or SD card. A "BUDA" folder is automatically created to store the BD- Live download.

[Local storage]: Select a USB storage device or SD card to store the

[DivX® VOD Code]: Display the DivX® registration code or the deregistration code for this player. [Version information]: Display the software version of this player. [Restore default settings]: Reset this player to the default settings made at the factory, except for password and parental control level.

Note

You cannot restrict Internet access on commercial Blu-ray discs.

Before you purchase DivX videos and play them on this player, register this player on www.divx.com with the DivX VOD code.

4 Update software

Before you update the software of this player, check the current software version:

Press , and then select [Setup] > [Advanced] > [Version information], and press OK.

Update software via the Internet

1Connect the player to the Internet (see "Set up a network").

2 Press , and select [Setup].

3Select [Advanced] > [Software update]> [Network].

»If an upgrade media is detected, you are prompted to start the update.

4Follow the instructions on the TV screen

to update the software.

player automatically turns off and on again.

Update software via USB

1Check the latest software version on www. philips.com/support.

Search for your model and click on "Software and drivers".

2Download the software into a USB storage device.

a Unzip the download, and make sure that the unzipped folder is named "UPG_ALL".

b Put the "UPG_ALL" folder in the root directory.

20EN