Philips DVDR990 Timer programming, Recording with automatic switch-off OTR One-Touch Recording

Page 30

English

Adjust the recording level with MANUAL 3 or 4 on the DVD recorder, so that the ‘0 dB’ mark lights up during the loudest parts of the recording.

You can switch back to automatic audio level control by pressing AUTO/MAN REC VOLUME again.

The display will show the current disc position and MANUAL disappears.

Note :

When DV input is selected, manual volume control is disabled.

Recording with automatic switch-off (OTR One-Touch Recording)

Insert a recordable DVD+RW or DVD+R disc.

Use CHANNEL 3 or CHANNEL 4 (on the recorder) or CH+, CH- (on the remote control) to select the programme number (programme name) from which you wish to record.

Press RECORD (on the recorder) or REC/OTR (on the remote control) twice.

A recording will be made of 30 minutes.

The required end time of the recording is shown in the timer box on screen. The remaining recording time is shown on the display.

Press RECORD or REC/OTR again to obtain a 30 minute increment.

Shortly after pressing REC/OTR, OTR can be cancelled by pressing CLEAR.

Timer programming

The DVD recorder needs the following information for every programmed recording:

-the date on which the recording is to be made;

-the channel;

-the start and stop time of the recording;

-VPS/PDC on or off;

-the recording mode.

The DVD recorder stores all the information mentioned above in a timer block. You can programme up to six timer blocks, one month in advance.

When you have programmed the timer, a red line on the disc bar (both on the display and on the Index Picture Screen) indicates what part of the disc will be overwritten by the programmed recording from the current disc position (on DVD+RW) or after the last title (on DVD+R).

When all timer blocks are full, the options timer programming and VIDEO Plus+ system cannot be accessed. For clearing a timer block, see ‘How to clear a timer block’.

What is ’VPS’/‘PDC’?

With ’VPS/PDC’, the TV station controls the beginning and the length of the programmed recording. This means that the video recorder switches itself on and off at the right time even if a TV programme you have programmed begins earlier or finishes later than expected.

Usually the start time is the same as the VPS/PDC time. If, however, in the TV guide, in addition to a TV programmes start time, a different VPS/PDC time is given, e.g.: ’20.15 (VPS 20.14)’, you must enter ’20.14’ as the start time exactly to the minute. If you want to enter a time that differs from the VPS/PDC time, you must switch off ’VPS/PDC’.

Timer programming with the VIDEO PLUS+® system

A PlusCode number is a number of up to nine digits, printed in most TV guides next to the start time of a TV programme.

All the information required for programming is encoded in the PlusCode number.

Select ‘VIDEO Plus+ system’ with v (up cursor) or w (down cursor).

VIDEO Plus+ system

Press u (right cursor).

30RECORDING

Image 30
Contents Page Laser safety Never Make or Change Connections With the Power Switched onGeneral information Contents Recording PlaybackTroubleshooting Access controlManaging disc content Using your DVD recorder remote control with your TV setIntroduction DVD Video RecorderCleaning discs Box contentsPlacement Remote controlConnecting to a TV set InstallationConnecting to the antenna Connections back side of your DVD recorderConnecting to a receiver with two channel analogue stereo Connecting to audio equipmentConnecting to a receiver equipped with Dolby Pro Logic Digital Multi-channel soundConnecting to other equipment Connections frontside of your DVD recorderCamcorder connection First time set-up virgin mode Power supplySwitching on Automatic settingAudio language Manual settingMenu language Subtitle languageCountry Auto TV Channel SearchTime/Date Functional overview Front of recorderRear of recorder Connection to the mains RF connection to TV setDisplay Remote control Loading discs OperationImportant notes for operation Disc typesDVD-RW On-screen display informationSystem menu bar CD-R/CD-RWUser preference menu operation Status boxUser preference menu icons Disc type icons Timer info boxTuner info box Disc status iconsOther title Index Picture ScreenDisc Pointer Disc BarSound settings Setting user preferencesPicture settings User preferencesLanguage settings Feature settingsRemote Control settings Record SettingsPBC Installation Press System Menu Connecting a decoderManual TV channel search Sort/Clear TV channels manuallyManual recording RecordingBefore you start recording Checking inputManual audio control Safe RecordingTimer programming with the Video PLUS+ system Timer programmingRecording with automatic switch-off OTR One-Touch Recording Press u right cursorTimer programming without the Video PLUS+ system If a timer setting is incorrect SolutionProgramming with ’NEXTVIEW Link’ English Playing a pre-recorded DVD- Video disc PlaybackPlaying a DVD+RW or DVD+R disc Playing a Super Video CD discMoving to another chapter/index General featuresMoving to another title/track Slow MotionRepeat A-B SearchRepeat RepeatScan Time searchSpecial DVD+RW/+R features Special DVD-Video featuresSubtitles Special VCD featuresPlaying an audio CD Playback Control PBCRepeat track/disc PauseMoving to another track Press Pause during play To return to play, press 2 PlayMoving to another album/track Playing an MP3 discPlay Repeat Album/Track/DiscChild Lock DVD and VCD Access controlAuthorizing discs when Child Lock is activated Activating/deactivating the child lockParental Level DVD-Video only Activating/Deactivating Parental ControlEnter the old code Move to ‘Change code’ using w down cursor Changing the 4-digit codeManaging disc content Title settingsDisc Info Screen Protection of recordings Disc SettingsChanging the Disc Name Erasing a discFavourite Scene Selection Making your edits DVD-compatibleCalling up the FSS menu Deleting chapter markers Inserting chapter markersHiding chapters Changing the index pictureDividing a title Append recordingMonitor Troubleshooting Symptom Remedy‘Disc error’ message on screen Timer programmeService codes on the display Disc errorsDVD+RW disc does not play on a certain DVD player Diagnosis programme System limitationsInstructions Glossary Term ExplanationSvcd PAL PBC PCM PDC RGBSecam VCD VCRUsing your DVD recorder remote control with your TV set Alternative procedureAppendix GPM Tel Poland Italy Tel 48-22-571 Tel 800-820026 Toll Free English English Specifications Disc Formats SupportedPhilips

DVDR990 specifications

The Philips DVDR990 is a versatile and innovative DVD recorder that has garnered attention for its impressive set of features and user-friendly design. Launched as part of Philips' extensive lineup of home entertainment systems, the DVDR990 stands out with its ability to record, play, and manage audio and video content with remarkable ease and quality.

One of the main features of the Philips DVDR990 is its dual recording capability, allowing users to record from various sources, including TV broadcasts, VHS tapes, and even camcorders. This flexibility enables users to capture their favorite shows or home videos effortlessly on DVD media, providing a convenient method to preserve cherished memories or must-see content.

The DVDR990 supports multiple recording formats, including DVD-R, DVD-RW, DVD+R, and DVD+RW. This wide range of media compatibility ensures that users can choose the format that best fits their needs. The ability to rewrite on DVD-RW and DVD+RW discs allows for easy editing and re-recording, catering to those who frequently capture content.

Additionally, the DVDR990 is equipped with a built-in digital tuner, allowing users to receive digital television signals without the need for an external tuner box. This feature simplifies the recording process and enhances overall convenience, especially as the transition to digital broadcasting has become more prevalent.

Picture and sound quality are significantly enhanced thanks to technologies such as Progressive Scan. This feature provides smoother video playback and improved picture clarity, particularly noticeable when playing back high-definition content. Built-in Dolby Digital support ensures a rich audio experience, making movie nights or home entertainment a pleasurable experience.

Moreover, the Philips DVDR990 includes a variety of connectivity options, such as composite, S-Video, and digital audio outputs. These connections enable users to easily hook up the device to different TVs or audio systems, maximizing the performance and compatibility of their home entertainment setup.

To further enhance user experience, the device incorporates an intuitive on-screen menu system. This user-friendly interface allows for straightforward navigation through various functions, including programmed recordings and playback options. The included remote control adds to the convenience, making it simple to operate from anywhere in the room.

In summary, the Philips DVDR990 is a robust DVD recorder that combines functionality, quality, and ease of use. Whether one is looking to archive home videos or record television programs, this device provides the tools necessary for a satisfying home entertainment experience, making it a noteworthy addition to any multimedia environment.