Philips HDRW720/69 Playback from the HDD, Symbols in the Media Browser, Play G, Change the Code

Page 10

Quick install guide

Playback from the HDD

Each recording stored on the HDD is displayed in the media browser with a corresponding index picture.

1Press BROWSER HDD on the remote control or HDD on the DVD recorder.

P The Media Browser appears.

2Select the title you want using B , A on the remote control or DOWN , UP on the device.

You can switch a page forward or back using CHANNEL q , CHANNEL r .

3You can choose one of the following options to start playback:

O OK

Playback always starts at the beginning of the selected title.

O PLAY G

Playback will start at the position where it was interrupted in the selected title( STOP h ). This also works if other titles or DVDs have been played in the meantime.

Symbols in the 'Media Browser'

If you call up the Media Browser with the BROWSER HDD button, following symbols can appear in the infobar at the top of the screen:

'P' This title was marked in the Time Shift Buffer for the storage on the HDD. This title can only be deleted or locked (child lock). If you want to make additional changes, you have to flush the time shift buffer. Use therefore the 'Flush Buffer' function (button SYSTEM MENU , menu 'Set up') or switch the DVD-Recorder to standby.

'E' This title has been played once (has been 'watched'). If there is no storage capacity free on the HDD such 'watched' titles will be deleted automatically if the function 'Auto delete' is switched on. You can change these setting in the title edit menu ( EDIT button, blue button, EDIT button )

Titles that were not played back, will have no symbol.

'F' The title is protected against editing and 'Auto delete'. If the title is not protected, no symbol will be shown.

'' Child lock is activated. The index picture is switched off. Playback starts only if the right PIN code was entered. If no PIN code has been entered or the PIN code was deleted, the PIN code is '0000'.

Change the Code

-Press DISC MENU and then SYSTEM MENU .

- Select the symbol 'A' using D then ' (Disc features)' with B and confirm using C .

-Confirm the line 'Access control' using C and enter the 4 digit code. Enter the code again for confirmation and end using SYSTEM MENU .

In the section 'Changing the PIN code' in chapter 'Access control (Child Lock)' you will find further informations.

'Q' The marked titles will be stored (archived) on a DVD+RW/+R.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents FlexTime FeaturesTime Shift Buffer Instant ReplayArchiving titles on a DVD+RW/+R Simultaneous recording and playbackMedia Browser Changing the PIN codeJump Back , D Recordings using the Time Shift BufferNavigation in the Time Shift Buffer Jump FWD , CManually started recordings Recording modeProgramming a recording Few closing instructionsConnecting to the mains Connecting to the TVInitial installation Please enter programme number appears on the screen Setting up repeat recordingsProgramming recordings with System Deactivate VPS/PDC Buttons in the Time Shift Buffer Symbols in the Time Shift Buffer Recording on the HDD ReturnEnding a recording manuallyimmediately Manual recordingsStarting a recording How can I delete the Time Shift Buffer?Pause Recording from the front socketsArchiving storing titles on a Interrupt the processPlay G Symbols in the Media BrowserPlayback from the HDD Change the CodeButtons in the Media Browser Available functions during archivingRemote control Quick install guide Most of the colour buttons work only if this bar is visible Colour buttonsAdditional TV functions YELLOW, BlueEnglish WwnnNNNwwnnwWNnwNwnNwnNnWNwwnN Hdrw 720/69
Top Page Image Contents