Philips DVDR612/97 user manual Video output, Language, Audio output, Digital output

System Menu - Setup (cont’d)

E n g l i s h

{Video output }

Choose the type of video output that matches the video connection between the DVD recorder and your TV.

–{ RGB•CVBS} : For RGB or CVBS connection.

–{ S-Video} : For S-Video connection.

–{ Automatic } : The output setting will automatically follow the video signal received.

Language

For more information on this menu, please see page 28 “Setting the language”.

Audio output

After connecting the DVD recorder to your TV and other devices, you may need to change the digital output setting. Adjust the Digital Output only if you used the DVD recorder’s COAXIAL socket.

DVD-VIDEO-TITLE 04CO1	STOP
Audio output
Set-up
Digital output

{Digital output }

–{ All } : Select this if you use the COAXIAL socket to connect the DVD recorder to a stereo receiver that has a built-in Multi-Channel decoder.

–{ PCM } : Select this if the connected audio equipment is not capable of decoding multichannel audio. Dolby Digital and MPEG-2 multi-channel signals are converted to PCM (Pulse Code Modulation).

–{ Off } : Select this to deactivate the digital audio output. For example, if you use the AUDIO OUT sockets to connect the DVD recorder to a TV or Stereo system.

TIPS: Underlined option is the factory default setting.

Press 1 to go back to previous menu item. Press SYSTEM-MENUto exit the menu.

58

3139 246 13454

1DVDR6xx_Eng00_13454c 58 9/28/04, 1:26 PM