Operation
Use of the remote control
wSelect your computer or other peripherals
Press this key repeatedly to select EXT1, EXT2, EXT3, EXT4, EXT5, FRONT, VGA or TV channels, according to where you connected your peripherals (see p. 31).
Remark: in VGA mode only some keys are valid. See VGA menu, p. 31. Menus and on screen information will disappear if you select VGA.
TV VCR DVD SAT TAPE CD TUNER CDR
Press one of these keys to use the remote control directly in the TV, video recorder, DVD or satellite mode. A green indicator lights up. Press the same key again within 3 seconds to use the remote control in the mode indicated below the key (tape, CD, tuner or
Press the key again within 3 seconds to return to the function named above the key.
BStandby
The set is switched off and the red indicator lights up.
To switch the TV on again, press - P + or the digit keys.
If your EasyLink video recorder has the system standby function and you press the standby key for 3 seconds, both the TV and video recorder are switched to standby.
bDual screen/PIP on/off
æ Teletext Guide on/off see p. 22
OK Press this key to activate your choice, when in the menus.
VVolume
Press + or - to adjust the volume.
¬Sound Mute
Temporarily interrupt the sound or restore it.
P Programme selection
To browse through the TV channels and sources stored.
Only those channels which are in the favourite list can be selected with the
0/9 Digit keys
To select a TV channel.
For a two digit channel number, enter the second digit within 2 seconds.
To switch immediately to a selected one digit TV channel, keep the digit key pressed a bit longer.
iScreen information
Press to display information about the selected TV channel and programme, e.g. the time, the sound reception, the picture settings, the remaining time set with the sleeptimer, the reminder set in Teletext Guide or the On timer settings.
w 
B
TV VCR DVD SAT
TAPE CD TUNER CDR
b S Ì
MOVIE SPORT CHILD NEWS OTHER
®Ò ‡ π †
æ b
OK | MENU |
Ï
V ¬ P
1 2 3
4 5 6
7 8 9
◊
i 0 0
ACTIVE
SMART CONTROL SMART
M h a
SOUNDPICTURE
See Setup, General menu, p. 8, and Dual screen/PIP, p. 20.
SFreeze format on/off
This function is not available with a VGA source. See Setup menu, General, Freeze format, p. 9 where you can select among three modes to be displayed when the freeze key is pressed on the remote control: Freeze, Replay, Photo finish.
When the mode is Freeze: press the S key to
When the mode is Replay: press the S key to redisplay a few seconds of stored video in a PIP window. Press the OK key to display a few seconds of a new stored video picture.
Press the S key again to switch off. When the mode is Photo finish: press the
Skey to display 12 PIP windows of stored video pictures. Press the OK key to display a new series of frozen pictures. Press the S key again to switch off.
Note: Continuing to hold the S key down will cycle the TV through the various modes (Freeze, Replay, Photo Finish).
ÌCinema Go
See separate Cinema Link instruction manual supplied.
bTeletext on/off see p. 25
Ï Main menu on/off see p. 4