Connect your smartphone to the same home network (see the user manual of the smartphone for details).
Turn on this player
Control your player
Use a smartphone to browse, control and play
1Insert a data disc or USB storage device into this player.
2On your smartphone, tap the MyRemote icon from the home screen.
»The name of this player is displayed on the smartphone.
3Select this player from the smartphone screen.
»The smartphone used as a virtual remote control is enabled.
4On the smartphone, tap the Media (Media) tab, and then select the disc or USB source.
»The folders in the data disc or USB storage device are displayed.
5
To access the remote control, return to the previous smartphone screen, and then tap the Remote (Remote) tab. Only the relevant control buttons are enabled.
Use Philips EasyLink
This player supports Philips EasyLink which uses the HDMI CEC (Consumer Electronics Control) protocol.You can use a single remote control to control EasyLink compliant devices that are connected through HDMI. Philips does not guarantee 100% interoperability with all HDMI CEC devices.
1Connect the HDMI CEC compliant devices through HDMI, and turn on the HDMI CEC operations on the TV and other
connected devices (see the user manual of the TV or other devices for details).
2 Press .
3Select [Setup]> [EasyLink].
4Select [On] under the options: [EasyLink], [One Touch Play] and [One Touch
Standby].
» EasyLink function is turned on.
One Touch Play
When you play a disc on this player, the TV automatically switches to the correct video input source.
One Touch Standby
When a connected device (for example TV) is put to standby with its own remote control, this player is put to standby automatically.
Stream media from an
Android device
With Philips SimplyShare, through this player
based device on your TV. For details, visit www.philips.com/support.
16EN