4 Update software
Before you update the software of this player, check the current software version:
•Press
, and then select [Setup] > [Advanced] > [Version Info.], and press OK.
Update software via the Internet
1
2
3
Connect the player to the Internet (see “Set up a network”). Press
, and select [Setup].
Select [Advanced] > [Software Update]> [Network].
» If an upgrade media is detected, you are prompted to start the update.
4Follow the instructions on the TV screen to update the software.
» When the update is complete, this player automatically turns off and on again.
Update software via USB
1Check the latest software version on www.philips.com/support.
• Search for your model and click on “Software and drivers”.
2Download the software into a USB storage device.
a Unzip the download, and make sure that the unzipped folder is named “UPG_ALL”.
3
4
5
bPut the “UPG_ALL” folder in the root directory.
Connect the USB storage device to the
(USB) connector on this player. Press
, and select [Setup].
Select [Advanced] > [Software Update]> [USB].
» If an upgrade media is detected, you are prompted to start the update.
6Follow the instructions on the TV screen to update the software.
» When the update is complete, this player automatically turns off and on again.
Caution
•Do not turn off the power or remove the USB storage device when the software update is in progress because you might damage this player.
22EN