Change settings, Picture, Sound | Philips BDP2930 specs

3 Change settings

This section helps you change the settings of this player.

2DISC MENU

Note

You cannot change a menu option that is grayed out. To return to the previous menu, press .To exit the menu, press .

Picture

1Press .

2Select [Setup] > [Video] to access the video setup options.

[TV display]: Select a picture display

[HDMI video]: Select an HDMI video resolution.

[HDMI Deep Color]: Display colors with more shades and hues when the video content is recorded in Deep Color and the TV supports this feature. [Picture settings]

color setting.

Note

If you change a setting, make sure that the TV supports	English
If you change a setting, make sure that the TV supports
the new setting.

Sound

1 Press .

2Select [Setup] > [Audio] to access the audio setup options.

[Night mode]: Select quiet or full dynamic sound. Night mode decreases the volume of loud sound and increases the volume of soft sound (such as speech).

[HDMI Audio]: Set an HDMI audio format when this player is connected through HDMI.

[Digital Audio]: Select an audio format for the sound output when this player is connected through a digital connector (coaxial).

[PCM Downsampling]: Set the sampling rate for PCM audio output when this player is connected through a digital connector (coaxial).

Note

Night mode is only available for Dolby encoded DVD and Blu-ray discs.

Network (installation, status...)

1 Press .

2Select [Setup] > [Network] to access the network setup options.

[Network installation]: Start a wired or wireless installation to make the network work.

EN 13