Troubleshooting, Main unit, Picture, Usb

USB

•Compatibility: Hi-Speed USB (2.0)

•Class support: USB Mass Storage Class

•File system: FAT16, FAT32

•USB port: 5V , 500mA

•Support HDD (a portable hard disc drive): an external power source may be needed.

Main unit

•Power supply rating: 220-240V~, 50Hz -60Hz

•Power consumption: 10 W

•Power consumption in standby mode: <

0.5W

•Dimensions (w x h x d): 310 x 39.5 x

217.7(mm)

•Net Weight: 1.12 kg

Accessories supplied

•Remote control and batteries

•Quick start guide

•CD-ROM built in multi-lingual user manual

(Continental Europe only) Optional accessory

•A wireless Philips USB adapter(named WUB1110, sold separately)

•Multimedia connections:Wi-Fi 802.11b/g/n

•Connectivity: Rear connection (USB)

•Ambient temperature: 5 deg C to 40 deg C.

•Dongle dimensions (W x H x D): 28.4 x 82 x 13.4 mm

Laser Specification

•Laser Type (Diode): AlGaInN (BD), AlGaInP (DVD/CD)

•Wave length: 398nm to 413nm (BD),645nm to 664nm (DVD), 770nm to 800nm(CD)

•Output power: 1.7mW (BD), 0.19mW(DVD), 0.25mW (CD)

6 Troubleshooting

Note

•• For identification and supply ratings, see the type plate at the back or bottom of the product.

•• Before you make or change any connections, make sure that all devices are disconnected from the power outlet.

Warning

•• Risk of electric shock. Never remove the casing of the player.

To keep the warranty valid, never try to repair the player yourself.

If you have problems using this player, check the following points before you request service. If you still have a problem, register your player and get support at www.philips.com/support.

If you contact Philips, you will be asked for the model and serial number of this player.The model number and serial number are on the back of this player.Write the numbers here: Model No. __________________________

Serial No. ___________________________

Main unit

The buttons on this player do not work.

•Disconnect this player from the power supply for a few minutes, and then reconnect.

Picture

No picture.

•Make sure that the TV is switched to the correct source input for this player.

•For the composite connection (via the VIDEO connector) to the TV, on this player select a video resolution of 480i/576i or 480p/576p under [HDMI Video] to enable video output.

18EN