Philips TP3284C1 TV Displays Wrong Channel or No Channels Above, Tips if Something Isnt Working

Page 48

TIPS IF SOMETHING ISN'T WORKING

Please make these simple checks before calling for ser-

vice. These tips can save you time and money since charges for TV installation and adjustment of customer controls are not cov- ered under your warranty.

No Power

No Picture

No Sound

Remote Does Not Work

TV Displays Wrong

Channel or No

Channels Above 13

CAUTION: A video source (such as a video game, Compact Disc Interactive - CDI, or TV information channel) which shows a constant non-moving pattern on the TV screen can cause picture tube damage. When your TV is continuously used with such a source, the pattern of the non-moving portion of the game (CDI, etc.) could leave an image permanently on the picture tube. When not in use, turn the video source OFF. Regularly alternate the use of such video sources with normal TV viewing.

•Check the TV power cord. Unplug the TV, wait 10 seconds, then reinsert plug into outlet and push POWER button again.

•Check that outlet is not on a wall switch. Be sure fuse is not blown on AC power strip.

•Check to be sure the system mode switch (TV/VCR/ACC) is in the correct position when using the remote control to power the set ON.

•Check antenna connections. Are they properly secured to the TV's ANT/CABLE plug?

•Check the TUNER control for CABLE or ANTENNA setting.

•Press the AV button on the remote to make sure the correct signal source is selected (AV 1, AV 2, SVID-R or MM 1, MM 2, MM 3).

•Check the VOLUME buttons.

•Check the MUTE button on the remote control.

•Check the SPEAKER on-screen control. OFF position will eliminate sound at the set.

•If attempting auxiliary equipment hookups, check audio jack connections.

•(If Applicable) Check Audio Receiver for correct operating mode.

•Check TV/VCR/ACC “System” switch on the remote. Move the switch to the TV position to operate the television.

•Check batteries. Replace with AA Heavy Duty (Zinc Chloride) or Alkaline batteries if necessary.

•Clean the remote and the remote sensor window on the TV.

•Check the TV power cord. Unplug the TV, wait 10 seconds, then reinsert plug into outlet and push POWER button again. Be sure fuse is not blown on AC power strip.

•Check to be sure TV outlet is not on a wall switch.

•Repeat channel selection.

•Add desired channel numbers (CHANNEL EDIT control) into TV memory.

•Check to be sure the TUNER control is set to the CABLE option.

Cleaning and Care

•To avoid possible shock hazard be sure the TV is unplugged from the electrical outlet before cleaning.

•When cleaning the TV screen take care not to scratch or damage the screen surface (avoid wearing jewelry or using anything abrasive). Wipe the front screen with a clean cloth dampened with water. Use even, easy, vertical strokes when cleaning.

•Gently wipe the cabinet surfaces with a clean cloth or sponge dampened in a solution of cool clear water. Use a clean dry cloth to dry the wiped surfaces.

•Never use thinners, insecticide sprays, or other chemicals on or near the cabinet, as they might cause permanent marring of the cabinet finish.

48

Page 47 Page 49
Image 48
Page 47 Page 49
Contents TP3284C1 Warranty Verification Safety Instructions Read before operating equipment Table of Contents Features Cable/AntennaAdjusting the TV Picture Buttons to adjust the selected controlPress the STATUS/EXIT button To remove the menu from the screenSetting the TV’S Clock Timer controlsPress the Numbered buttons Cursor UP or CursorActivating the TV’S on Timer Control Timer controlPress the Menu button on Remote to show the on-screen menuSelecting the TV’S on Timer Channel Setting the TV’S on Timer Start Time To highlight the Start TimeTo enter the desired start up time Press the STATUS/EXIT but- ton to remove the menu fromTurning on the on Timer Display Button three times to select the Features menuPress the Cursor Down Understanding Smartlock Movie RatingsUsing Smartlock Setting UP the Access Code Enter current access codeDown to highlight SmartLock controlUsing Smartlock Blocking Channels Press the Channel + orThis stops the viewing of VCR, DVD, etc Select blockUsing Smartlock Movie Rating Press the Cursor Right Button to access the movie ratingsBe highlighted Button to select Movie RatingUsing Smartlock TV Rating Appear within the menuButton to select TV Rating Using Smartlock Blocking OptionsUsing Smartlock Block Unrated Button or the CursorLeft button to set Block Unrated to on orUsing Smartlock no Rating Press the Menu button on the remote to show the on-screenMenu Left button to set noReviewing the Smartlock Settings Example Blocking is set to OFFViewing Blocked Programming XxxxTurn the NR feature on or OFF Turning on the Noise Reduction ControlTo highlight the NR control Button again to highlight the NR option areaTurn the Contrast + feature on or OFF Turning on the Contrast + ControlButton again to highlight the Contrast + option area Using the Closed Caption Control Select the mode you wantButton to highlight the Closed CAP control Button again to highlightUsing the Sleep Timer Control Good BYE SleepAdjusting the TREBLE, BASS, and Balance Sound Controls Button twice to select the Sound menuSetting the TV for Stereo and SAP Programs Remember, if stereo is not presentOn a selected show and the TV is Placed in the Stereo mode, the sound comUsing the Incredible Stereo Control Using the Volume BAR ControlSetting the Audio OUT Control Button repeatedly to selectUse the Cursor Left or Right buttons to set Audio OUT to Variable orUsing the TV Speaker Control and Audio Output Jacks Connect the Right and LeftPress the Cursor Down button to select the Speakers Use the Cursor Right or Cursor Left buttonsUsing the AUDIO/VIDEO Input Jacks Connect the Video yellowUsing the AUDIO/VIDEO Input Jacks CONT’D Connect the S-VIDEOTurn the VCR or Digital Press the Smart Picture Button repeatedly to select eitherUsing the Smartsound Control Press the Smart Sound butPress the Channel + or Press the Surf button onRead, the Surf List is EMPTY, Press to addSetting the Remote Control to Operate Accessory Devices Going on to the following section Is necessaryPlace the TV/VCR/ACC Press the VCR RecordPress the Smart Sound Enter the THREE-DIGITTurn on the device by press- ing the Power button on Mode Switch in the proper posi TionDevice you are attempting to pro- gram Remote Control Direct Entry Codes Remote VCR Code noRemote Dvdcode no Using the REMOTE’S VCR Buttons Connect the Video OUT Also connect the Audio OUTRight and Left jacks from Move to the next page afterTurn the TV and VCR or Press the PIP ON/OFF butPress the PIP Source but AV 1, AV 2, SVID-R for pictureUsing the PIP PICTURE-IN-PICTURE Feature Adjusting the PIP Color and Tint Adjust the Color and Tint bars to the desired levelsButton to select the PIP menu Remember, althoughFirst use an optional signal More PIP Picture -IN -PICTURE ConnectionsConnect the Cable OUT on Connect the Video OUT jackFirst connect the original cable Connect the ANT OUT jack onConnect the yellow Video Connect a second yellow VideoTV Displays Wrong Channel or No Channels Above Tips if Something Isnt WorkingGlossary to Television Terms IndexPhilips Consumer Electronics Company Texas Limited Warranty
Top Page Image Contents