Philips 34PW9818 setup guide Contents, Cable TV, Antenna TV

Colorl TV

Quick Use and Setup Guide

CONTENTS

Important Notice/Warning . . . . . . . . . . . . . . . . . . . . .1 Making Basic TV Connections

Basic Cable TV Connections . . . . . . . . . . . . . . . . . . .1 Basic Antenna TV Connections . . . . . . . . . . . . . . . . .1 Basic TV and Onscreen Menu Operation . . . . . . . . . .2 Remote Battery Installation . . . . . . . . . . . . . . . . . . . .3 Remote Control Button Descriptions . . . . . . . . . . . . .3 Using the Language Control . . . . . . . . . . . . . . . . . . . .4 How to Automatically Program Channels . . . . . . . . . .4 How to Use the Demo Feature . . . . . . . . . . . . . . . . . .4

IMPORTANT

NOTE: This owner's manual is used with several different television models. Not all features (and drawings) discussed in this manual will necessarily match those found with your television set. This is normal and does not require that you contact your deal- er or request service.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THIS UNIT TO RAIN OR EXCESSIVE MOISTURE.

As an Energy Star® Partner, Philips Consumer Electronics has determined this product meets the Energy Star® guidelines

for energy efficiency. Energy Star® is a U.S. registered mark. Using products with the Energy Star® label can save energy. Saving energy reduces air pollution and lowers utility bills.

BASIC TV CONNECTIONS

CABLE TV

Your Cable TV input into your home may be a single (75 ohm) cable or a converter box installation. In either

case, the connection to the TV is very easy. Follow the steps below to connect your cable signal to your new television.

If your cable signal comes directly from a round 75Ω coaxial cable use the following steps:

1 Connect the open end of the round Cable Company sup- plied cable to the 75Ω input on the TV. Screw it down finger

tight.

2 Plug the television into the wall outlet and turn the TV on. Refer to the AUTOPROGRAM feature to program all the available channels on your cable signal.

Direct Cable

Connection:

Cable signal coming from Cable Company (Round 75Ω coaxial cable)

1

Jack Panel

Back of TV

2

AC Power

Wall Outlet

Power Plug

from back of TV

If your cable signal comes from a cable box, use the following steps:

Cable Box Connection:

3 Connect the open end of the round Cable Company sup- plied cable to the cable signal IN(put) plug on the back of the Cable Box.

	Using a separate round coaxial cable, connect one end to the
4 OUT(put) plug on the back of the Cable Box.
5	Connect the other end of the round coaxial cable to the
	75Ω input on the back of the television. Screw it down finger
	tight.
6	Plug the television into the wall outlet and turn the TV on.
	Refer to the TUNER and AUTOPROGRAM features on page
	4 of this Quick Use Guide. TUNER should be set to the

CABLE option. AUTOPROGRAM can be set to program all the available channels on your cable signal into the televi- sion’s memory.

ANTENNA TV

Acombination antenna receives normal broadcast chan- nels (VHF 2–13 and UHF 14–69). Your connection is easy because there is only one 75Ω (ohm) antenna plug on

the back of your TV, and that’s where the antenna goes.

1 If your antenna has a round cable (75 ohm) on the end, then you're ready to connect it to the TV.

If your antenna has flat, twin-lead wire (300 ohm), you first need to attach the antenna wires to the screws on a 300- to 75-ohm adapter.

2 Push the round end of the adapter (or antenna) onto the 75Ω (ohm) plug on the back of the TV. If the round end of the antenna wire is threaded, screw it down finger tight.

3 Plug the television into the wall outlet and turn the TV on. Refer to the TUNER and AUTOPROGRAM features on page 4 of this Quick Use Guide. TUNER should be set to the ANTENNA option. AUTOPROGRAM can be set to program all the available channels on your cable signal into the televi- sion’s memory.

3	4		Jack Panel Back
			of Cable Box
	INPUT	OUTPUT	Cable Box
			Power Cord

			AC Power
			Wall Outlet
Round 75Ω			Jack Panel
Coaxial Cable			Back of TV
Cable Signal IN from			6
the Cable Company
5
			Power Plug
			from back of TV
Antenna Connection:
Outdoor or Indoor Antenna
(Combination VHF/UHF)
The combination antenna receives normal	Jack Panel,	Back of TV	AC Power
broadcast channels 2-13 (VHF) and 14-69 (UHF).
			Wall Outlet
300 to 75-ohm
Adapter
1			3
2
Twin
Lead Wire
Round 75Ω Coaxial			Power Plug
Cable from Antenna			from back
			of TV

3104 315 2179.1