Manual Store
This menu is used to store channels one at a time.
&Press the key.
éWith the cursor, select the Install menu and follow by the Manual.
“Colour Sys(tem): use theor key to select the desired colour system;
Auto, PAL, NTSC 3.58 or NTSC 4.43.
‘Sound Sys(tem): use the or key to select the desired sound system; Auto, BG, I, DK or M.
(Search: Press .The search starts. Once a channel is found, the scanning
stops. Go to the next step.
If no picture is found, consult the possible solutions (p.15)
§Channel: enter the required channel
with the, or digit keys. Fine Tune: if the reception is not
satisfactory, adjust using the or keys.
!Store: Press .The channel is stored. çRepeat steps “ to ‘ for each channel
you wish to store.
0To quit the menus, press .
Sort
This feature allows you to rearrange channels according to your preference.
&Press the key.The Main menu is displayed on the screen.
éWith the cursor, select the Install menu
followed by the Sort menu.
“Use the or key to select the channel number you want to change
from (e.g. 001) and confirm selection with
the key.
‘Use the or key to select the channel number you want to change to (e.g. 004) and confirm selection with the
key.
The change is done. Channel 4 will move up to channel 3 and channel 3 will move up to channel 2.
(Repeat steps “ and ‘ for each channel you wish to change.
§To quit the menus, press .
Installation | User |
7 | 06/29/04, 4:27 PM |