Philips 20PT 30B manual Setting the TV’S Clock, Timer Active Channel

Your television comes with an onscreen clock. During normal

operation the clock appears on the screen when the STATUS/EXIT but- ton is pressed or when a channel change occurs.

BEGIN

Press the CLOCK button on the remote to display the onscreen CLOCK menu.

Press the CURSOR UP ▶ OR CURSOR DOWN ■ buttons until the words SET CLOCK are high-

lighted.

Enter the current time using the NUMBERED buttons. If the first number is a single digit first enter a zero then the digit (i.e., press “0”, then press “8”).

Press the CURSOR RIGHT

▶▶or CURSOR LEFT ◀◀ but- tons to set either AM or PM time.

Note: The CLOCK onscreen menu can also be accessed through the main menu by pressing the MENU

button; then scrolling up/down with the CURSOR UP ▶ or CURSOR DOWN ■ buttons until

the word CLOCK is highlighted.

Press the CURSOR RIGHT ▶▶

button to activate the CLOCK menu and follow the steps above to set the time.

SMART HELP

Remember: Be sure to press “0” first and then the

hour number for single digit entries.

To clear the onscreen menu press the STATUS/EXIT button, or wait a few seconds after you have fin- ished your adjustment and the menu will automatically disappear from the screen.

SETTING THE TV’S CLOCK

SET CLOCK	- - :- - AM
TIMER ACTIVE	ON
CHANNEL	12
		SET CLOCK	10:00 AM
		TIMER ACTIVE	ON
		CHANNEL	12

		POWER	1
SLEEP
A/CH	STATUS/EXIT CC	CLOCK
3		TV/VCR
1	2	3
ACC
4	5	6
7	8	9
AUTO		2
	0
SOUND		PICTURE

MENU SURF

4

VOL CH

MUTE

Note: If a power failure occurs, the TV's

CLOCK will have to be reset.

If no time is set, the time will not appear onscreen.

8