Philips 20PT6446 Basic Antenna And Cable Connections, Antenna Connection, Direct Cable Connection

Page 5

BASIC ANTENNA AND CABLE CONNECTIONS

BASIC ANTENNA AND CABLE CONNECTIONS

Your home’s signal input might come from a single (75 ohm) round cable, a converte r box or from an antenna. In either case the connection to the TV is very easy.

1

2

If your Cable TV signal or Antenna signal

is a round cable (75 ohm) then you are ready

to connect to the TV.

If your antenna has flat twin lead wire

(300 ohm), you first need to switch the antenna wires to the screws of a 75 ohm adapter.

If you have a Cable Converter Box :

Connect the Cable TV signal to the Cable Signal IN(put) plug on the Converter.

Connect the Cable TV cable or Antenna cable

(or 300 to 75 ohm adapter) to the 75Ω plug on the TV

If you have a Cable Converter Box : Connect

the OUT (put) plug from the Converter to the 75Ω plug on the TV.

Antenna Connection

Combination

VHF/UHF Antenna

(Outdoor or Indoor)

300 to 75Ω		Back of TV
Adapter
1	75	2

Twin Lead

Wire

Round Cable

75Ω

Direct Cable Connection

Cable signal coming from Cable Company

HELPFUL HINTS

Back of TV

1

75

75Ω Round

Coaxial Cable

After using the Auto Program Control, press the

CH+ and - buttons to scroll through all the chan-Jack Panel Back of TV nels stored in the television’s memory.

5

Image 5

Contents User Manual Thank you for choosing Philips20PT6446 Need help fast?CONTENTSFEATURES INTRODUCTIONKnow these safety symbols Product Safety NotificationProof of Purchase Additional Benefits of Product OwnershipIMPORTANT SAFETY INSTRUCTIONS Read before operating equipment Antenna Connection BASIC ANTENNA AND CABLE CONNECTIONSDirect Cable Connection HELPFUL HINTSREMOTE CONTROL BASIC TV AND REMOTE CONTROL OPERATIONBack of Remote Control To load the supplied batteries into the remoteCable Box w/Audio/Video Outputs CABLE BOX CONNECTIONSCable to the left and right Audio Out L R jacks on the cable box Connect theJacks located at the back of the TV AV AUDIO/VIDEO INPUT CONNECTIONSide AV Inputs SIDE AV CONNECTIONSS-VIDEO S-VHS INPUT CONNECTIONS COMPONENT VIDEO CVI INPUT CONNECTIONS 3 Accessory Device 5 Equipped with Component Video OutputsBack of TV WhiteAV OUTPUT CONNECTIONS REMOTE CONTROL BUTTON DESCRIPTIONS HOW TO USE THE LANGUAGE CONTROL When ANTENNA is selected, channels 2 - 69 are available HOW TO USE THE TUNER MODE CONTROLWhen CABLE is selected, channels 1 - 125 are available 5 Press CURSOR to start the Auto Program scanning of channels. Auto AUTO PROGRAMChannel Edit makes it easy for you to ADD or SKIP CHANNEL EDITchannels from the list of channels stored in the TV’s memory AUTO PICTURE PICTURE MENU CONTROLSAUTO SOUND SOUND MENU CONTROLSscreen THE 43 EXPAND FORMAT CONTROLExpand PG Parental Guidance Suggested - Contains material UNDERSTANDING AUTOLOCK CONTROLSMOVIE RATINGS Let’s start by learning how to set a personal access code SETTING UP AN ACCESS CODEdisplayed on the screen BLOCK CHANNELSBlock Channel Block All BLOCK/CLEAR ALL CHANNELS AT THE SAME TIMEClear All MOVIE RATINGS TV RATINGS Blocking On Unrated On BLOCKING OPTIONSNo Rating Blocking Options BLOCKING, UNRATED or NO RATING menuCLOSE CAPTIONING SLEEPTIMERprogram is in progress CC Off CC1 CC2To remove a channel from one of the SURF list QUADRASURFA/CH ALTERNATING CHANNELSQUADRASUFR SMILEY FROWNIE Placement of the TV CLEANING AND CARECleaning GLOSSARYSYMPTOMS TROUBLESHOOTING TIPSInstallation SUGGESTED STEPS TO TAKEWEIGHT & DIMENSIONS SPECIFICATIONSSpecifications and information are subject to change without notice SOUND90 Days Labor & One 1 Year Parts & Two 2 Years Display PHILIPS LIMITED WARRANTYINDEX 3139 125 Specifications are subject to change without notice2005 Koninklijke Philips Electronics N.V. All rights reserved