Philips 20RF50S warranty HOW to Clear ALL Blocked Channels Using Autolock

Various onscreen messages will appear when someone tries to view blocked pro-

gramming. The message is determined by how the current programming is blocked. You may view the blocked programming and turn OFF the AutoLock™ feature by using the Clear All control or by entering your access code.

1 Press the MENU button on the remote to show the on-screen menu.

2 Press the CURSOR UP or DOWN button until the word FEATURES is

highlighted.

3 Press the CURSOR RIGHT button to display the FEATURES menu

options.

4 Press the CURSOR UP or DOWN button until the words AutoLock are

highlighted.

5 Press the CURSOR RIGHT button.

6 Enter the correct access code num- ber. “XXXX” shows on the Access

Code display as you press the NUM-

BERED buttons. AutoLock menu

options will be displayed.

7 Press the CURSOR UP or DOWN buttons until the words CLEAR ALL

are highlighted.

8 Press the CURSOR RIGHT button to clear all blocked channels. The Clear All option will read, “Cleared.”

9 When finished, press the STATUS /EXIT button to remove the menu from the TV’s screen.

HELPFUL HINT

If you tune to a specific channel that has been blocked by BLOCK CHANNEL or any of the AutoLock™ RATING options, simply enter your four-digit access code to view the channel.

NOTE: this will unblock ALL channels until the TV is shut OFF. When powered back ON, all previously blocked channels will be blocked again.