Philips 27PT6442, 27PT6441, 27PT6437, 27PT5437, 27PT5441, 32PT5437 AV AUDIO/VIDEO Input Connection

Page 8

4

AV (AUDIO/VIDEO) INPUT CONNECTION

The TV’s audio/video input jacks are for direct picture and sound connections between the TV and a

VCR (or similar device) that has audio/video output jacks. Both the AV1 and AV2 Input Jack connections are shown on this page, but either one can be connected alone. Follow the easy steps below to connect your accessory device to the AV1 and AV2 IN Jacks located on the back of the TV.

1Connect the VIDEO (yellow) cable to the VIDEO AV1 IN (or AV2 IN) jack on the back of the TV.

2Connect the AUDIO (red and white) cables to the AUDIO (left and right) AV1 IN (or AV2 in) jacks on the rear of the TV.

3Connect the VIDEO (yellow) cable to the VIDEO OUT jack on the back of the VCR (either one or two) or accessory device being used.

4Connect the AUDIO (red and white) cables to the AUDIO (left and right) OUT jacks on the rear of the VCR (either one or two) or accessory device being used.

5Turn the VCR (either one or two) or accessory device and the TV ON.

6Press the AV button to set the TV to its AV1or AV2 channel.

7With either of the VCRs (or accessory devices) ON and a pre- recorded tape (CD, DVD, etc.) inserted, press the PLAY button to view the tape on the television.

Back of TV

 

 

1

 

 

 

3

 

 

 

 

 

 

 

Monitor out

 

in

AV2 in

 

 

VIDEO

 

 

 

 

 

 

L/Mono

 

 

 

 

 

 

AUDIO

 

 

 

 

 

 

 

 

 

 

 

S-VIDEO

 

R

 

 

 

 

 

 

 

 

 

VIDEO

 

 

AV1

2

 

 

 

2

4

Connection

 

 

 

ANT/CABLE

S-VIDEO

R

L

VIDEO

1

 

OUT

OUT

AUDIO OUT

OUT

 

 

 

 

Back of VCR

 

VCR One (or

7

 

 

 

5 accessory device) (Equipped

 

 

with Audio and Video Output

 

 

Jacks)

 

 

 

 

Video In

 

 

 

 

 

 

 

 

 

 

 

 

(Yellow)

AV2 Connection

 

 

 

 

 

 

 

 

 

 

 

Audio In

 

 

 

 

 

 

(Red and

 

 

 

 

 

 

White)

ANT/CABLE

S-

R

L

VIDEO

 

 

OUT

 

AUDIO OUT

OUT

 

 

4 3

7

5 VCR Two (or accessory device) (Equipped with

Video and Audio Output Jacks)

HELPFUL HINT

Audio and video cables are not sup- plied with the TV, but are available from Philips or electronics retailers.

Image 8
Contents Colorl TV Know these safetysymbols Important Safety Instructions Subject Panel No Panel LayoutPanel Index Basic Antenna and Cable Connections Cable Box w/Audio/Video Outputs Cable BOX ConnectionsCable Box w/RF In/Outputs Basic TV and Remote Control Operation Press the Power button to turn the TV onPress the Volume + button To increase the sound level, or Volume button to Lower the sound levelAV AUDIO/VIDEO Input Connection 6Press the AV button to set the TV to its AV1or AV2 channelSide AV Connections Video S-VHS Input Connections Turn the VCR and the TV onComponent Video CVI Input Connections PlayerMonitor Output Connections Audio System ConnectionRemote Control Button Descriptions Power Button CH Button Alternate ChannelFrownie Button Auto Picture ButtonHOW to USE the Language Control HOW to USE the Tuner Mode Control He Tuner Mode control allows you to change the TV’sAutomatically Program Channel Edit List of channels stored in the TV’s memoryPicture Menu Controls Sound Menu Controls SAPExpand 43 Enlarges HOW to USE the 43 Expand Format ControlPress the Cursor UP 3 or Down 4 buttons to select Setting the TV Clock Using the Timer Control Button to display the Features menu Setting TV to Startup on a Specific Channel Activate Control HOW to View Time Using the Display Control Active Control Options Understanding Autolock Controls Movie RatingsSetting UP AN Access Code Proceed to the next panel to learn MoreBlock Channels Block Channel OnBLOCK/CLEAR ALL Channels AT the Same Time Movie Ratings TV Ratings TV Industry ratingsDemo Mode Blocking OptionsUnrated, or No Rating menu Press the Cursor UP 3 or DownSleeptimer Closed CaptioningAuto Picture Auto SoundQuadrasurf Press the Channel + orRemove Item? Press Troubleshooting Care and Cleaning CleaningRenewed