Sylvania SST4324 owner manual Preparation for USE, Operations

PICTURE CHANNEL SET [ENG] / ESP / FRA V-CHIP SET UP CAPTION [OFF] TV SOUND [MAIN]

PICTURE CHANNEL SET

[ENG] / ESP / FRA

V-CHIP SET UP

CAPTION [OFF] TV SOUND [MAIN]

PICTURE

CHANNEL SET [ENG] / ESP / FRA V-CHIP SET UP CAPTION [OFF] TV SOUND [MAIN]

ADD/DELETE AUTO PRESET CH

PREPARATION FOR USE

LANGUAGE SELECTION

If you want to change the language of the on-screen menu, follow the proce- dure below.

1) Connect the power cord to a standard AC outlet. Note: If some digits appear in the corner of the screen,

press the POWER button without unplugging the power cord.

2)Press the POWER button to turn on the TV.

3)Press the MENU button so that the menu display appears

on the TV screen.

4) Press the CH(annel) ▲ or ▼ button to point to "[ENG]".

5) Select "ENG(lish)", "ESP(añol)" or "FRA(nçais)" by using the VOL(ume) ▲ or ▼ button.

3) Press the VOL(ume) ▲ button so that "ADD/DELETE" is selected.

4) Use the CH(annel) ▲ or ▼ button to select the channel you wish to put into memory or to erase from memory.

Note: The display will return to the normal screen automatically in about 10 seconds.

Perform "ADD/DELETE" function while this display appears on the screen.

●Press the VOL(ume) ▲ or ▼ button to light up the channel number in LIGHT BLUE if you wish to add the channel into memory.

●Press the VOL(ume) ▲ or ▼ button to light up the channel number

in LIGHT RED if you wish to erase the channel from memory.

5) Press the MENU button to exit the menu.

ADD/DELETE AUTO PRESET CH

6) Press the MENU button to exit the menu.

CHANNEL PRESETTING

Note: You can preset channels before using CHANNEL ▲ or ▼ button.

To preset a channel or to change a preset channel, follow the procedure below. 1) Press the POWER button to turn on the TV.

2) Press the MENU button so that the menu display appears on the TV screen.

3) Press the CH(annel) ▲ or ▼ button to point to "CHANNEL SET". Then, press the VOL(ume) ▲ button.

4) Press the CH(annel) ▲ or ▼ button to point to "AUTO PRESET CH". Then, press the VOL(ume) ▲ button.

The tuner scans and memorizes all active channels in your area.

●The TV distinguishes between standard TV channels and cable (CATV) channels.

●When AUTO PRESET CH action is completed, the lowest memorized channel reappears on the screen.

●When you press the CH(annel) ▲ or ▼ button after selecting "AUTO PRESET CH", the tuner will stop at the memorized channels only.

●The TV may recognize TV channels to be CATV channels by receiving conditions. In this case, try AUTO PRESET CH action again in the fine receiving conditions.

●When AUTO PRESET CH is activated where there is no TV signal input, "NO TV SIGNALS" will appear on the display after the completion of the channel scanning.

[ADD/DELETE FUNCTION]
1)	Press the MENU button so that the menu display appears on the TV	PICTURE
	screen.	CHANNEL SET
		[ENG] / ESP / FRA
2)	Press the CH(annel) ▲ or ▼ button to point to "CHANNEL SET".	V-CHIP SET UP
		CAPTION [OFF]
	Then, press the VOL(ume) ▲ button.
		TV SOUND [MAIN]

MTS (Multi-Channel Television Sound) System
You can listen to a program in MTS stereo by following the steps below.
Menu				To show the status, press the DISPLAY
Selection			PICTURE
PICTURE	MAIN	MONO
Type of			SAP	button on the remote control.
CHANNEL SET			CHANNEL SET
broadcast			[ENG] / ESP / F
[ENG] / ESP / FRA		-None-		SAP: Second Audio Program, which
Regular	-None-		-None-
V-CHIP SET UP			V-CHIP SET UP	means your program can also be
Stereo		MONO	CAPTIONSTEREO[OFF
CAPTION [OFF]STEREO				received in a second language or
broadcast			TV SOUND [MO
TV SOUND [MAIN]		MAIN		sometimes a radio station.
SAP	MAIN		SAP

[To Select STEREO, MONO or SAP in Stereo broadcast]

1)Press the MENU button so that the menu display appears on the TV screen.

2)Press the CH(annel) ▲ or ▼ button to point to "TV SOUND".

3)Press the VOL(ume) ▲ or ▼ button to select your desired stereo mode. ([MAIN], [MONO] or [SAP].)

: Press the VOL(ume) ▲ or ▼ button.

PICTURE	PICTURE	PICTURE
CHANNEL SET	CHANNEL SET	CHANNEL SET
[ENG] / ESP / FRA	[ENG] / ESP / FRA	[ENG] / ESP / FRA
V-CHIP SET UP	V-CHIP SET UP	V-CHIP SET UP
CAPTION [OFF]	CAPTION [OFF]	CAPTION [OFF]
TV SOUND [MAIN]	TV SOUND [MONO]	TV SOUND [SAP]

RESUME FUNCTION

If the power fails or is disconnected while the TV is powered on, the TV will turn on automatical- ly when the power resumes.

OPERATIONS

WATCHING A TV PROGRAM

1)Press the POWER button to turn on the TV.

2)Select the desired channel with the CH(annel) ▲ or ▼ button.

3)Adjust the volume to the desired listening level using the VOL(ume) ▲ or ▼ button.

4)Adjust picture controls for a natural looking image. (See "PICTURE ADJUSTMENT".)

: Press the CH(annel) ▲ or ▼ button.

MANUAL SPORT NEWS MOVIE GAME

SETTING THE SLEEP TIMER

The sleep timer function allows you to shut off the power automatically after a set time period.

1)Press the POWER button to turn on the TV and press the SLEEP button on the remote control .

2)You may change the sleep time by pressing the SLEEP button on the remote

control repeatedly. The timer can be set up to 90 minutes. 10 minutes each	SLEEP 10
time the SLEEP button is pressed. (The timer display counts

PICTURE ADJUSTMENT

1)Press the MENU button so that the menu display appears on the TV screen.

2)Press the VOL(ume) ▲ button so that "PICTURE" is selected.

3)Press the CH(annel) ▲ or ▼ button to select “MANUAL”. Then, press the VOL(ume) ▲ button.

4)Select the feature you wish to adjust with the CH(annel) ▲ or ▼ button and adjust it with the VOL(ume) ▲ or ▼ button.

up and sleep timer can be displayed on the screen when you	To cancel the sleep timer:
press the SLEEP button on remote control.)
	Press the SLEEP button repeated-
Note: When you disconnect the unit from the AC outlet,
	ly until "SLEEP 0" is displayed.
or when you have a power failure, the sleep time will be
lost.

CLOSED CAPTION SELECTION

You may view specially labeled (cc) TV pro-			1)	Press the MENU button so that the menu
grams, movies, news, prerecorded tapes, etc.				display appears on the TV screen.
with either a dialogue caption or text display			2)	Press the CH(annel) ▲ or ▼ button to point
added to the program.				to "CAPTION".
			3)	Press the VOL(ume)		▲ or ▼ button to
				select the mode you wish.
			4)	When done, press the MENU button to exit
: Press the VOL(ume) ▲ or ▼ button.
				the menu.
PICTURE	PICTURE	PICTURE			PICTURE	PICTURE
CHANNEL SET	CHANNEL SET	CHANNEL SET			CHANNEL SET	CHANNEL SET
[ENG] / ESP / FRA	[ENG] / ESP / FRA	[ENG] / ESP / FRA			[ENG] / ESP / FRA	[ENG] / ESP / FRA
V-CHIP SET UP	V-CHIP SET UP	V-CHIP SET UP			V-CHIP SET UP	V-CHIP SET UP
CAPTION [OFF]	CAPTION [ C1]	CAPTION [ C2]			CAPTION [ T1]	CAPTION [ T2]
TV SOUND [MAIN]	TV SOUND [MAIN]	TV SOUND [MAIN]			TV SOUND [MAIN]	TV SOUND [MAIN]

AV MEMORY

BRIGHT

Adjust until the darkest parts of the picture are as bright as you prefer.

[+] : increase brightness [-] : decrease brightness

CONTRAST

Adjust to increase or decrease contrast.

[+]: increase contrast [ - ] : decrease contrast

COLOR

Adjust to be brilliant or pale color.

[+]: be brilliant color [ - ] : be pale color

TINT

Adjust to obtain natural skin tones.

[+]: greenish tone [ - ] : reddish tone

SHARPNESS

Adjust to detail in the picture.

[+]:increase sharpness [-]:decrease sharpness

Notes:

●“+” is achieved by pressing the VOL(ume) ▲ button and “-” by pressing the VOL(ume)▼ button.

●In the above steps, the picture adjustment display will disappear from the TV screen automatically after about 10 seconds if you do not press any buttons. Press the MENU

and VOL(ume) ▲ button so that "PIC- TURE" is selected. Then, press the CH(annel) ▲ or ▼ button repeatedly until the display returns to the screen.

●If you adjust any picture control after you set the Game mode to [ON], the Game mode is set to [OFF] automatically.

[USING THE GAME BUTTON]

You may also set the Game mode and external input mode at the same time by pressing the GAME button on the remote control. “GAME” appears on the TV screen.

●To exit the Game mode and external input mode, press the GAME button on the remote control again.

●To cancel the Game mode only, adjust the picture control. The GAME mode will be set to [OFF] automatically as explained in the previous section. In this case, “VIDEO” (external input mode) instead of “GAME” appears on the TV screen.

●If you press the GAME button when the TV is off, the TV turns on and will be in the Game mode and external input mode auto- matically.

This feature allows you to expand your viewing experience select MANUAL, SPORT, NEWS, MOVIE, and GAME to match the program you are watching.

1)Press the MENU button so that the menu display appears on the TV screen.

2)Press the VOL(ume) ▲ button so that "PICTURE" is selected.

3)Select the item with the CH(annel) ▲ or ▼ button.

Note: See “PICTURE ADJUSTMENT” to manually customize the picture.

: Press the CH(annel) ▲ or ▼ button.

[-] BRIGHT [+] [-]CONTRAST [+] [-] COLOR [+] [-] TINT [+] [-]SHARPNESS [+]