4 Connecting peripheral equipment
Equipment such as VCR, Laser disc player, VCD etc. could be connected to the video and audio (AV) sockets at the back of the TV. Switch off the TV and equipment before making any connection.
Connection for playback
VIDEO 2 VIDEO 1 MONITOR
in in out
VIDEO
L
AUDIO
R
VCR 
VCR
OR OR
VCD
Laser disc player
VIDEO 2 VIDEO 1 MONITOR
in in out
VIDEO
L
AUDIO
R
VCR
VIDEO 2 VIDEO 1 MONITOR
in in out
75Ω
g | VIDEO |
L
AUDIO
R
VCR
1.Connect to AV sockets
You may choose to connect up VIDEO 1 in or VIDEO 2 in or both.
4connect the corresponding sockets of
the equipment to that of the TV.
5to view the playback, select the first AV channel (if connection is made to sockets at VIDEO 1 in) or the second AV channel (if connection is made to
sockets at VIDEO 2 in).
Note: For mono equipment, connect to the VIDEO and L sockets only.
2.Connect to S-Video socket (applicable to certain models only)
If you have a
quality.
4 connect the corresponding socket of
the equipment to that of the TV.
5 to view the playback, select the Y/C channel.
Note: If both the
3.Connect to aerial socket
(only for VCR)
The playback on your VCR is considered a TV channel by your TV if you connect via the aerial socket. You must tune in to your VCR’s test signal and assign the channel number 0 to it. Refer to your VCR’s instruction manual for more details.
4connect the RF cable to the VCR’s “RF in” and connect the “RF out” of the VCR to the aerial socket of the TV.
4select channel 0 and tune in to to your
VCR’s signal.
5to view the playback, select channel 0.