TUNER
English | Automatic programming | |
1 Press TUNER (BAND). | ||
| ||
| 2 Press PROGRAM for more than one | |
| second. | |
| ™ The PROG flag starts flashing and | |
| “AUTO” will be displayed. | |
| ™ The system will search for every | |
| available station in the FM waveband | |
| first, then search the MW waveband. | |
| ™ All available stations will be stored | |
| automatically. The frequency and | |
| preset number will be displayed | |
| briefly. | |
| ™ The system will stop searching when | |
| all the available radio stations are | |
| stored or when the memory for 40 | |
| preset radio stations is used. | |
| ™ The system will remain tuned to the | |
| last stored preset radio station. |
Notes:
–You can cancel the automatic
programming by pressing PROGRAM or Ç(on the system only).
–If you want to reserve a section of preset numbers, for example preset numbers 1 to 9, select preset 10 before starting automatic programming, only the preset numbers 10 to 40 will be programmed.
16
Manual programming
1Press TUNER (BAND).
2Press TUNER (BAND) again to select the desired waveband : FM or MW.
3Press PROGRAM for less than one second.
™The PROG flag starts flashing.
™The next available preset number will be displayed for selection.
4Press àor áto tune to the desired frequency.
•If you wish to store the radio station to
another preset number, press 4 or 3 to select the desired preset number.
5Press PROGRAM again.
™The PROG flag disappears and the radio station will be stored.
•Repeat steps 3 – 5 to store other preset radio stations.
Notes:
–When 40 radio stations are stored and you attempt to store another radio station, the display will show "PROGRAM FULL”. If you want to change an existing preset number, repeat steps 3 – 5.
–You can cancel manual programming by pressing Ç(on the system only).
–During programming, if no button is pressed within 20 seconds, the system will exit program mode automatically.
Tuning to Preset Radio
Stations
•Press 4 or 3 to select the desired preset number.
™The preset number, radio frequency, and waveband appear on the display.
Changing the MW tuning grid
(not available for version /30)
The frequency step can be changed if necessary. In North and South America, the frequency step between adjacent channels in the MW band is 10 kHz. In other parts of the world, it is 9 kHz. The frequency step preset in the factory is 9 KHz.
For MW Band
To change from 9 kHz to 10 kHz or vice versa
Changing of tuning grid will erase all previously stored preset stations.
1Disconnect the system from the AC power supply (pull out the AC power cord).
2Press and hold TUNER and TUNING áwhile reconnecting the system to the AC power supply.
™ Display will show “GRID 10” or “GRID 9”.
Notes:
–GRID 9 indicates that the tuning grid is in step of 9 kHz in MW band. GRID 10 indicates that the tuning grid is in step of 10 kHz in MW band.
–FM tuning grid will also be changed from 50 kHz to 100 kHz or vice versa. All preset stations will also be erased.
pg | 16 | 3/3/00, 4:24 PM | 3139 116 19401 |