Philips 27PT5445/37 user manual Video S-VHS Input Connections, Press the Play
button

6

S-VIDEO (S-VHS) INPUT CONNECTIONS

The S(uper)-Video connection on the rear of the TV can provide you with better pic-

ture detail and clarity for the playback of accessory sources such as DBS (digital broad- cast satellite), DVD (digital video discs), video games, and S-VHS VCR (video cassette recorder) tapes than the normal antenna pic- ture connections.

NOTE: The accessory device must have an S-VIDEO OUT(put) jack in order for you to complete the connection on this page.

1Connect one end of the S- VIDEO CABLE to the S-VIDEO jack on the back of the TV.Then con- nect one end the AUDIO (red and white) CABLES to the AV In AUDIO L and R (left and right) jacks on the rear of the TV.

2Connect other end of the S- VIDEO CABLE to the S-VHS (S- Video) OUT jack on the back of the VCR.Then connect the other ends of the AUDIO (red and white) CABLES to the AUDIO (left and right) OUT jacks on the rear of the VCR.

3Turn the VCR and the TV ON.

4Press the AV button or the CH

+or CH – buttons on the remote to scroll the channels until SVHS appears in the upper left corner of the TV screen.

5Now your ready to place a prere- corded video tape in the VCR and

NOTE: When using additional accessories, only one external source will be audible, as there is only one set of sound inputs. Component Video (CVI) input will dominate over all other inputs, including S-Video (S-VHS) and AV. When S-Video (S-VHS) is used, it will dominate over the AV input.

		1 CVI AV In		1
		VIDEO
		L/Mono
		AUDIO	Pb
		R	Pr
			VIDEO INPUT	S-VIDEO
Audio
Cables				Back of TV
(Red &			S-Video
White)			Cable
L	R	VIDEO	S-VIDEO
AUDIO OUT		OUT	OUT
2			2
3			5
				VCR or External
				Accessory
	4		4	Device
				(with S-Video
				Output)

VOL

press the PLAY
button.