Philips 25PS40S99 manual TV Displays Wrong Channel or No Channels Above, Troubleshooting Tips

Page 35

TROUBLESHOOTING TIPS

Please make these simple checks before calling for

service. These tips can save you time and money since charges for TV installation and adjustment of customer controls are not cov- ered under your warranty.

No Power

No Picture

No Sound

Unusual Screen

Coloring

Remote Does Not Work

TV Displays Wrong

Channel or No

Channels Above 13

CAUTION: A video source (such as a video game, Compact Disc Interactive - CDI, or TV information channel) which shows a constant non-moving pattern on the TV screen, can cause picture tube damage. When your TV is continuously used with such a source the pattern of the non-moving portion of the game could leave an image permanently on the picture tube. When not in use, turn the video source OFF. Regularly alternate the use of such video sources with normal TV viewing.

•Check the TV power cord. Unplug the TV, wait 10 seconds, then reinsert plug into outlet and push POWER button again.

•Check that outlet is not on a wall switch. Be sure fuse is not blown on AC Power strip.

•Check antenna connections. Are they properly secured to the TV's 75Ω plug?

•Check the TUNER MODE control for CABLE or ANTENNA setting.

•Check Audio/Video Input jack connections if using a VCR or other external device.

•Check the VOLUME buttons.

•Check the MUTE button on the remote control.

•Check Audio/Video Input jack connections if using a VCR or other external device.

•Turn the TV OFF for several seconds, then power the set back ON.

•Unplug the TV for FIVE minutes. Plug the TV back into the AC outlet and power the TV ON. This should correct the problem.

•Check the Picture menu options for proper control settings.

•Pressthe Auto Picture button on the remote to change the color options. If the color resets itself, readjust the Picture menu option control.

•Check batteries. Replace with AA Heavy Duty (Zinc Chloride) or Alkaline batteries if necessary.

•Clean the remote and the remote sensor window on the TV.

•Check the TV power cord. Unplug the TV, wait 10 seconds, then reinsert plug into outlet and push POWER button again. Be sure fuse is not blown on AC Power strip.

•Check to be sure TV outlet is not on a wall switch.

•Repeat channel selection.

•Add desired channel numbers (CHANNEL control) into TV memory.

•Check to be sure the TUNER MODE control is set to the CABLE option.

Cleaning and Care

•To avoid possible shock hazard be sure the TV is unplugged from the electrical outlet before cleaning.

•When cleaning the TV screen take care not to scratch or damage the screen surface (avoid wearing jewelry or using anything abrasive). Wipe the front screen with a clean cloth dampened with water. Use even, easy, vertical strokes when cleaning.

•Gently wipe the cabinet surfaces with a clean cloth or sponge dampened in a solution of cool clear water. Use a clean dry cloth to dry the wiped surfaces.

•Never use thinners, insecticide sprays, or other chemicals on or near the cabinet, as they might cause permanent marring of the cabinet finish.

35

Page 34 Page 36
Image 35
Page 34 Page 36
Contents For fast help, call us first Warranty Verification Important Safety Instructions Table of Contents Connect the Cable TV cable to If your Cable TV signal is a singleHooking UP Your TV Basic Cable TV Connections If you have a Cable Converter BoxIf your antenna has a round cable If your antenna has flat twin-lead wireHooking UP Your TV Basic Antenna TV Connections Connect the audio cables red Hooking UP Your TV Basic TV to VCR ConnectionsExternal A/V Inputs Connect the yellow video cableRemote Basic TV/REMOTE Operations TelevisionDescription of Remote Control Buttons Press the Cursor UP or Using the Language ControlCable , or Auto mode When finished, press the Status HOW to USE the Tuner Mode ControlHOW to Automatically Program TV Channels HOW to ADD or Delete TV Channels Press the Menu button on HOW to USE the Picture Adjustment ControlsWhen finished, press the Status Press the Cursor Right  HOW to USE the DNR Noise Reduction ControlPress the Cursor UP or HOW to USE the Contrast + Black Stretch Control HOW to Adjust the Bass , Treble , and Balance Controls HOW to USE the AVL Automatic Volume Leveler Control Press the Cursor UP or CUR HOW to SET the TV for Stereo ProgramsPress the Clock button on HOW to the Timer ControlsUnderstanding the Autolock Controls Over the next few pages you’ll learn how to block channelsAccess code is not known Setting UP the Autolock Access CodePress the Cursor UP or Down button until the words HOW to Block ChannelsHOW to Clear Blocked Channels AT the Same Time HOW to Block ALL Channels AT the Same Time Option on or OFF Blocking Programming Based on Movie RatingsTV Ratings Rating Sub-Menus Blocking Programming Based on TV RatingsBlocking Options Using the Autolock Blocking OptionsVOL HOW to USE the Closed Caption ControlSetting UP the Sleeptimer Option MOVIES, SPORTS, Weak Signal Setting the Auto Picture Control Press the Auto Sound button Setting the Auto Sound Control Press the Auto Sound button on CH Button Using the Quadra Surf ButtonsRepeatedly pressing the same COL Using the Quadra Surf ButtonsTV Displays Wrong Channel or No Channels Above Troubleshooting TipsGlossary to Television Terms Index Canada Factory Service LocationsHouston Limited Warranty
Top Page Image Contents