
Enter the correct access code num- ber. “XXXX” shows on the Access Code display as you press the NUM- BERED buttons. AutoLock menu options will be displayed.
Press the CURSOR UP ▲ or DOWN ▼ buttons until the words BLOCK CHANNELS are highlight-
Press the CURSOR RIGHT © but- ton. “ACCESS CODE” will appear on the screen.
Press the CURSOR RIGHT © but- ton to display the FEATURES menu options.
Press the CURSOR UP ▲ or DOWN ▼ button until the words
remote to show the on-screen menu.
Press the MENU button on the
2
3 Press the CURSOR UP ▲ or DOWN ▼ button until the word FEATURES is highlighted.
Press the NUMBERED (or CH +, –) buttons to tune the channel you wish to block or censor.
After your personal access code has been set (see previous page), you are now
ready to select the channels you want to block out or censor.
9
ed.
8
7
6
AutoLock are highlighted.
5
4
1
HOW TO BLOCK CHANNELS
Press the CURSOR RIGHT © but- ton to turn blocking ON or OFF for that channel. When ON is selected the channel will be blocked.
Press the CH + or – button to select
10 other channels you wish to block. Repeat step 9 to block the new chan- nel.
HELPFUL HINT
If you tune to a blocked channel and enter your Access Code to view the channel, ALL blocked channels will be viewable until the TV has been turned off. When the TV is powered back ON, the previously blocked channels will be blocked again.
NOTE: The 0,7,1,1 access code shown on this page is the default code or a way to reset the code when the current access code is not known.
Enter your Access Code to view a tuned channel that is blocked with Block Channel.
23