Philips 32PF9731D/10 Sleeptimer, Childlock, Important you have forgotten your code

EN Adjust feature menu settings (Continued)

TV menu	Features	Sleeptimer
			This sets a time period after which the TV automatically
TV settings	.............
			switches to standby.
Features	Sleeptimer
		1.	Select Sleeptimer.
Installation	Childlock	2. Press the cursor right.
Exit	Set/Change code	3. Select a value with the cursor up/down.
	On timer		> The list will have values from 0 to 180 minutes.When 0
			is selected, the sleeptimer is switched off.
	Common interface
	Demo		Note: you can always switch off your TV earlier or select
Info			another time set.
		Childlock
			With a 4-digit code, you are able to lock TV channels and
			external sources to prevent children from watching certain
			programmes.

1.Select Childlock.

2.Press the cursor right to enter the Childlock menu.

3.Enter your 4-digit code.

Note: you have to re-enter your code each time you enter the Childlock menu.

4.Select one of the menu items of the Childlock menu and press the cursor right:

-Lock to lock all channels and externals:

-Custom lock to lock a certain programme or to lock all the channels from a certain time.

<Select:

-Lock after to lock all programmes from a certain time onwards.

<Press the cursor right twice.

<Select On to set the lock.

<Press the cursor left.

<Select Time and press the cursor right.

<Enter the time with the cursor up/down and right.

-Channel lock to lock a certain TV channel or external.

<Press the OK key to activate/deactivate.

-Parental rating to set an age rating to a digital programme if the programme is parental rated.The ratings applied are according the selected country in the initial installation.

<Press the cursor right and select an age rating with the

cursor up/down.

- Select Unlock to disable all locks you have set.

Important: you have forgotten your code !

1.Select Change code and press the cursor right.

2.Enter the overriding code 8-8-8-8.

3.Enter a new personal 4-digit code.

4.Confirm your new entered code.

>The previous code is erased and the new code is stored.

24