Manual store
This menu is used to store the programmes one at a time.
&Press the H key.
éWith the î key, select Manual Store and press ¬. Use the îÏ keys to select a setting and the Ȭ keys to adjust. :
Manual Store
Æ
System | Europe Æ |
Search | 224 MHz |
“System: select Europe (automatic detection*) or West Europe (BG standard), East Europe (DK standard), UK (I standard) or France (LL’
standard).
*Except for France (LL’ standard), you must select choice France.
‘Search: press ¬.The search starts. Once a programme is found, the scanning stops. Go to the next step. If you know the frequency of the
required programme, this can be entered directly using the 0 to 9 keys.
If no programme is found, see Tips chapter at the end of the instruction for use.
(Program No.: enter the required number with the Ȭ or 0 to 9 keys.
§Store: press ¬.The program is stored.
è Repeat steps ‘ to § for each programme to
store.
! To quit the menus, press d.
Other settings in the menu
&Press the H key.
éUse the îÏ keys to select a setting and the Ȭ keys to adjust. :
|
| Brightness |
|
| Colour |
|
| Contrast |
Brightness | ! | Sharpness |
- | + | Auto Store |
|
| |
|
| Manual Store |
•Brightness: this changes picture brilliance.
•Colour: this changes the intensity of the colour.
•Contrast: this changes the difference between the light and dark tones.
•Sharpness: this changes the picture definition.
•Auto Store: to start automatic search for all programmes available in your region.Then, you need to use the Manual Store menu to
renumber the programmes (see p. 3). To quit or interrupt the search, press H.
•Manual Store: see top of page.
“To quit the menus, press d.
Other functions
Connecting peripheral equipment
Use the euroconnector socket located at the back of the set or the front AV connections (when available).
To select connected equipment, press several times the n key.
Most equipment (decoder,VCR) carries out the switching itself.
Headphones socket (only available on certain versions)
When headphones are connected, the sound on the TV set will be cut.
The @”#keys are used to adjust the volume level.
The headphone impedance must be between 32 and 600 Ohms.
The keys on the TV set
The TV set has 4 keys : VOLUME - + (- ”+) and PROGRAM - + (- P +). To access or exit the menus, press simultaneously the ” - and ” + keys.Then use the - P + and - ” + keys to select and adjust.
Tips : see page 2.
5