Installing the TV

PHILIPS Institutional TV - Instructions for use

•Place your TV on a stable and strong base.

•Leave at least a free pace of 5 cm on both sides and 10 cm from the top for good ventilation of the set.

•Do not cover the ventilation openings with items such as newspapers, cloths etc.

Connecting the mains

Insert the main plug into the wall socket and switch on. Please refer to the specification at the back of the TV for the correct operating voltage.

Installing the remote control

•Remove the cover at the back of the remote control.

•Insert the correct type and size batteries into the compartment making sure they are the right way around.

•You can secure your batteries by fastening an appropriate screw into the hole of the battery cover.

Tips and Alerts

•Never try repairing the set by yourself, always contact a qualified technician.

•Your TV contains material which can be recycled and reused by specialized companies. Please find out about local regulations on the disposal of your old TV set.

•TV consumes energy in the stand-by mode. Energy consumption contributes to air and water pollution. We advise you to switch off your TV overnight instead of leaving it in stand-by mode.

Accessing the Set-up Menu

Accessing the Set-up Menu, while the set is in the Security High state, can only be done by a T374AH Institutional Setup remote Menu command. While the set is in the Security Standard State the Setup Menu may be accessed with a normal guest cursor remote control by a sequence of numbers (319753MUTE).

•Language

The Language function is shown in the Menu as "LANGUAGE", and its valid states are "ENGLISH", "DEUTSCH", "FRANCAIS", "ITALIANO".

•No. of Programs

This item of the Setup Menu is activated by highlighting the item using the cursor up/down keys, then pressing the cursor right key. Number of TV, Pay TV, Radio and Info programs can be set and stored.

•TV Installation

When this menu is open, all the protections are inactive. To exit any menu press Menu button.

Input

The "Input" menu item selects the desired input source that will be assigned to the program. Possible values are Front End, AV1, and AV2YC (internal interface, for system TVs only).

System

Sets for East regions will have 2 states, WEST EU (PAL/SECAM-BG) and EAST EU (PAL/SECAM-DK).

Sets for West regions will have 3 states, WEST EU (PAL/SECAM-BG), UK (PAL-I), FRANCE (SECAM-L/L').

Manual Search

3 digits can be entered for a frequency in MHz or right cursor for auto search; during frequency entry the not yet entered digits are displayed as dashes "-".

Program no.

The programme type can be selected with the cursor left/right buttons. These buttons will toggle between all available types: "TV", "INFO", "PAY-TV"; if the radio is external (no radio tuner is present in the chassis), "RADIO" is displayed, if the radio is internal there will be a separate radio installation menu. If the program number of a certain type is 0, the corresponding type is not displayed.