Philips 8P6054C warranty Feature Menu Control Adjustments, Picture Source

Page 10

FEATURE MENU CONTROL ADJUSTMENTS

PICTURE SOURCE

T he picture for the TV can come through either the ANTENNA

plug or the AUDIO/VIDEO INput jacks (on the rear of the TV). The Picture Source control simply tells the TV which one of these picture sources it is to show on the TV

screen. BEGIN

1Select PICTURE SOURCE SELECT control.

With the FEATURES MENU on screen, move the RED highlight

with the MENU (M) buttons. Then press the MENU button.

2Press the MENU ▲▼ buttons to move the RED highlight. Press

the MENU button to turn the desired PICTURE SOURCE control ON (✔).

ANT A or B- for a picture signal coming from either the ANT(enna) A or B Input plugs on the TV.

AUX 1- for a picture signal coming from the AUX 1 Video Input jack on the rear of the TV.

AUX 2- for a picture signal coming from the AUX 2 Video Input jack on the rear of the TV.

AUX 3- for a picture signal coming from the Video Input jack on the front of the TV.

3Press the STATUS button to clear the screen.

STOP

SMART HELP

Remember, the AUX 1,

AUX 2, and AUX 3 modes must have a video signal source connected (to their INPUT plug) or the TV screen will be blank.

(See page 28 for connection details).

		MAIN MENU
	PICTURE				SOUND
	FEATURES				HELP
	1ST TIME SETUP				EXIT
2					3
1		PLAY ▶		STATUS
				LIGHT
REW		MENU
REW	−	M	+	FF
◀◀	−	M	+	FF
				▶▶
				PAUSE II
MUTE		STOP	■	SURF

1 VOL

CH

2

ON/OFF POS SWAP FREEZE

		SIZE
2 TUNER PIP
A◀ ◀ B 1	2	3

TV/VCR 4 5 6

ENTER

SLEEP 7 8 9

SMART0

POWER VCR CBL TV

M O D E

FEATURE MENU
PICTURE	CABLE
SOURCE	TUNING
CLOSED	CHANNEL
CAPTIONS	MEMORY
EXIT	MORE...
	1 OF 5

PICTURE SOURCE SELECT
ANT A
ANT B
AUX1
AUX2
AUX3
EXIT	HELP

Note: A “S-VIDEO 1” (or 2) Input will appear as a PICTURE SOURCE SELECT(ion) in place of the AUX 1 (or AUX 2) position when the S- VIDEO plugs (on the rear of the TV) are connected. See page 30 for operating details on S-VIDEO.

10

Image 10

Contents N E R ’ S M a N U a L Warranty Verification Safety Instructions Read before operating equipment Table of Contents Features Standard TV broadcast VHF/UHF or Cable TVPicture Menu Control Adjustments COLOR, Brightness SHARPNESS, TINT, PicturePicture Menu Controls Select Clearview controlIf there is RED or Blue color RED/BLUE ConvergenceSelect Convergence Press the Menu ButtonsCorrection control Flesh CorrectionSelect Flesh Press the Menu buttonsSelect Picture Source Select control Feature Menu Control AdjustmentsPicture Source Press the Menu buttons to move the RED highlight. PressSelect Closed Captioning control Feature Menu ControlsClosed Caption Text 1, 2, 3CABLE- If you do have Cable TuningSelect Cable Channel Tuning control Cable TV connected to the TV. Channels 1-125 availablePress the Menu button to turn Channel Memory AUTO-PROGRAMMINGSelect Channel Memory Press the Status or Menu MADD/DELETE Channels Select Channel Memory ADD/DELETE Channels controlSelect SET Clock control SET ClockPress the remotes number Select SET on Timer control SET on TimerScreen Press the Sleep button Sleep TimerPress the Sleep button on Press the Status or MenuHalf Hour Reminder Channel DisplaySelect Channel Display control Select Half Hour Reminder controlParental Control Next Enter Your New Access Code shows on the screenEnter a new four digit number code using the remote Select the Parental ControlMenu M buttons to highlight Select the Block Channels controlPress the Menu Select the Block Channels itemChannel Labels Do you ever have trouble remembering on whichSelect the Language LanguageDisplay control BASS, TREBLE, Balance Sound Menu Control AdjustmentsBass Boost Select Stereo sound control Sound Menu ControlsStereo Press the Status button to clearIncredible Stereo Display VolumeSelect Display Volume control Select Incredible Stereo controlTurn OFF the TV TV SpeakersOption Speakers controlPlace the speakers so Surround SoundOn see Variable Audio section below Variable Audio OutputConnect the Video OUT jack from the VCR to the AUX Using the AUDIO/VIDEO Input JacksVCR/AUX Inputs Connect the Audio OUT jacks Right and Left fromCamcorder to the Front Audio in jacks on the TV AUX 3 InputsSelect the AUX Picture Source Select control on the TV AUX1 S-VIDEO Inputs Connect the S-VIDEO SAUDIO/VIDEO Outputs Using the AUDIO/VIDEO Output JacksConnect the Video OUT jack Press the Menu M button to Smart PicturePress the Smart button on Press the Menu orSmart Picture Remote Control OperationChange Label Press the Status button to clear the screen when completed Smart SoundChannel for viewing. You can use With the Smart Surf controlOn see above, select a desired Number buttons on the remote orSetting the Remote to Work Vcrs Within thirty seconds after Please read through steps Before beginningPress and release the REC Release the VCR SystemSetting the Remote to Work Cable TV Converters Cable ConverterButton, Enter the TWO Release the CBL SystemPoint the remote at Setting Your Remote to Work VCRS, Converters Search Please read through steps 1-4 before beginningUsing the Remotes VCR Buttons Rewind ButtonConnect your Antenna or HOW to USE the PICTURE-IN-PICTURE PIP FeatureConnect the twin Output Select control to ANT B Turn the TV onPlace the TVs PIP Source Press the MenuUsing PIP with the Remote Control Press the PIP ON/OFF button to show the PIP picturePIP Source Selecting the Picture Source for PIPSelect PIP Source control Select PIP Color or PIP Adjusting Picture -IN -PICTURE Color and TintPIP Color / PIP Tint Press the + and buttons toConnect the Cable OUT on First use an optional signalMore PIP Connections Connect the Video OUTHe on screen Help menu offers both Operating Tips TV Help MenuSelect Help on the TVs Main Menu Press the remotes Menu TV Displays Wrong Channel or No Channels Above Tips if Something Isnt WorkingGlossary to Television Terms Index Philips Consumer Electronics Company Georgia North Carolina Illinois Page Page Limited Warranty