Philips MX3291B warranty If your Antenna or Cable TV, Signal has a round cable con

QUICK USE AND INSTALLATION GUIDE

TABLE OF CONTENTS

Color Television and Remote Control

11 12	1		Getting Started
10		2	Warning/Precautions	1
9		3
8		4

75

6

Hooking Up Your TV	1
How to Use the “INSTALL” Controls	2-3
• Using the Language Control	2
• Setting the TV to Auto Program Channels	2
• Setting the TV for a Cable or Antenna Signal	2
• Using the Adding and Deleting Channels	3
• Setting the Channel Name Control	3
• How to use the Smart Clock control	3
Basic TV and Remote Control Operation	4

•For details on product registration, warranty, and service refer to the other literature included with your TV information packet.

Please retain all these materials and keep them handy for future reference.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THIS UNIT TO RAIN OR EXCESSIVE MOISTURE.

NOTE: This Quick Use Guide may be used with other models. Some of the features listed may or may not apply to your TV.

ANTENNA OR CABLE TV

ANT(ENNA) A & B INPUTS

Your TV has two sepa- rate ANT(enna)/Cable

inputs on the rear of the set. These two signal inputs offer convenient hook-up options for both normal TV program view- ing and Picture-In-Picture (PIP) features.

The ANT(enna) A input is

intended for use and view- ing on the TV’s main screen. Your home’s prima- ry Antenna, or Cable TV signal, should be connect- ed to this input for normal TV setup, use and feature operation.

The ANT(enna) B input is

asecond, or auxiliary sig- nal source, designed to supply your TV’s Picture- In-Picture (PIP) feature. For many homes the use of a single existing Antenna (or Cable TV) source, for both ANT A and B, will be the preferred method of connection. This type of connection (optional Signal Splitter required) will work properly for the TV’s Main on-screen fea- tures, as well as retain all the features designed for PIP. For more details refer to the Picture-In-Picture section in your other owner’s manual.

BEGIN			SMART
A typical ANT(enna)	Connect your Antenna or	Connect the twin Output	HELP
A and B connection (using a	Cable TV signal to the single	plugs on the Signal Splitter to	Remember,
common signal source and an	75 ohm input plug on the two-	the ANT A and ANT B inputs
			be sure to set the
optional Signal Splitter):	way Signal Splitter (optional).	on the rear of the TV. Push the
			TV for the type sig-
If your Antenna or Cable TV	Then connect two lengths of RF	round connector end of the RF
			nal you've connect-
		Coaxial Cable onto the
signal has a round cable con-	Coaxial Cable to the two Output		ed (see "TUNER"
		ANT(enna) plug and screw it
nector (75 ohm) on the end,	plugs on the two-way Signal		section on page 2 of
		down tight (if using threaded
then you're ready to connect it	Splitter (F-type connector on		this Guide.)
		cables).
to the 75ohm Signal Splitter.	both ends).		Your TV can set
If your antenna has flat twin-
lead wire (300 ohm), you first			itself to select only
need to attach the antenna wires			the channel numbers
to the screws on a 300 to 75			on your Cable sys-
ohm adapter before connecting	Combination VHF/UHF Antenna		tem (see “Auto
to the 75ohm Signal Splitter.			Program" page 2). If
			you use a Cable
300 to 75Ω Adapter		Back of TV	Converter box, set
			the TV to the same
Twin Lead			channel as the con-
Wire			verter's CH 3/4
OR	- Outdoor or Indoor Antenna -		switch (on the rear of
			the converter.)
	receives normal broadcast channels
	2-13 (VHF) and 14-69 (UHF).

Round Cable						To order accessories
						such as those listed
75Ω Ohm
						below contact your
	2					dealer or our Parts
1		ANT(enna) B				Information Center
						at: 1-800-851-8885.
		Input
						•	Two Way Splitter
		8			8	•	300-75 ohm
		+	R –	– L +
		SURROUND SOUND					Adapter
	PIP ANT "B"	S-VIDEO				1. DO NOT CONNECT SURROUND SOUND SPEAKERS
						ATTENTION - TO AVOID DAMAGE
	75					TO A SEPARATE AMPLIFIER OR TO SPEAKERS
						CONNECTED TO ANOTHER PRODUCT.
						2. DO NOT CONNECT LEFT AND RIGHT SPEAKER
						OUTPUT TOGETHER.

			VIDEO			• UHF/VHF
OR					3
			L			Antenna
		75	R/MONO
		ANT "A"	AUDIO
				IN-2		Combiner
	OPTIONAL TWO-WAY
	SIGNAL SPLITTER	ANT(enna) A
	(single 75ohm Input to twin
		Input
	75 ohm Outputs - optional		Note: Proper operation of your TV is not dependent upon
	RF Coaxial connecting
			connection of the ANT B input. Its main purpose is to provide
	cables also required)
			an easily connected, dedicated picture source for PIP feature
			use. Other signal source options (such as a satellite dish sys-
			tem, additional external antenna, VCR, or Video Game) could
			also be connected and displayed on the TV screen through the
			use of the ANT B input.
Cable TV Signal			Note: Although the ANT B input can be used and swapped
			as the source for the TV’s Main picture, certain setup fea-
			tures (such as Smart Clock) are only based on a signal being
			detected at the ANT A input. To ensure that all features are
Round Cable			operating properly, you may not want to rely solely on the ANT
			B input as your TV’s Main screen signal source.
75Ω Ohm	Cable TV Company

CABLE BOX

CABLE CONVERTER BOXES

For homes with Cable TV Converter

Descrambler Boxes (with Premium/Movie Channels scrambled), follow the steps to the right for an alternative ANT A and

• The signal routed to the TV’s ANT A input will allow for		Connect to ANT A Input
Premium/Movie channels to be viewable on the TV.
• Channel selection will be at the Converter.
• The ANT A input channel on the TV should be set to the same
output channel as the Converter box (usually CH3 or 4).
IN	OUT

Cable TV Company
OPTIONAL TWO-WAY	Cable TV Converter
	Box Connection
SIGNAL SPLITTER

Connect to ANT B Input

•The signal routed to the TV’s ANT B input will allow for the selection and viewing of Cable channels at the TV (except for the scrambled Premium/Movie channels).

ANT B PIP feature hookup. Note the Cable TV signal will be split before connection to the Converter box (an option- al two-way 75 ohm Signal Splitter will be required).

BEGIN
		Connect one of the Signal	Connect the remaining
	Connect one end of RF
Connect your Cable
TV signal to the single 75 ohm	Coaxial Cable to each of the	Splitter OUTPUTs to the	Signal Splitter OUTPUT
INPUT plug on a two-way	OUTPUT plugs on the 75 ohm	INput terminal on the Cable	from the Splitter to the ANT
Signal Splitter (optional).	Signal Splitter. The two lengths	TV Converter Box. Then route	B Input on the rear of the TV.
	of RF Coaxial Cable need F-	another connection from the
	type connectors (screw-on or	Cable Converter OUTput ter-
	push type) for both ends.	minal to the ANT A Input on
		the rear of the TV.

3135 015 05920