Philips TS3260C1 manual Setting the TV’S Clock, Channel SET Clock 1000 AM Timer Activate

Your television comes with an onscreen clock. During normal

operation the clock appears on the screen when the STATUS/EXIT but- ton is pressed or when a channel change occurs.

BEGIN

Press the CLOCK button on the remote to display the onscreen CLOCK menu.

Press the CURSOR UP ▶ OR CURSOR DOWN ■ buttons until the words SET CLOCK are high-

lighted.

Enter the current time using the NUMBERED buttons. If the first number is a single digit first enter a zero then the digit (i.e., press “0”, then press “8”).

Press the CURSOR RIGHT

▶▶or CURSOR LEFT ◀◀ but- tons to set either AM or PM time.

Note: The CLOCK onscreen menu can also be accessed through the main menu by pressing the MENU

button; then scrolling up/down with the CURSOR UP ▶ or CURSOR DOWN ■ buttons until

the word CLOCK is highlighted.

Press the CURSOR RIGHT ▶▶

button to activate the CLOCK menu and follow the steps above to set the time.

SMART HELP

Remember: Be sure to press “0” first and then the

hour number for single digit entries.

To clear the onscreen menu press the STATUS/EXIT button, or wait a few seconds after you have fin- ished your adjustment and the menu will automatically disappear from the screen.

SETTING THE TV’S CLOCK

SET CLOCK	- - :- - AM
TIMER ACTIVATE	ON
CHANNEL	12
		SET CLOCK 10:00 AM
		TIMER ACTIVATE	ON
		CHANNEL	12

		POWER		1
SLEEP
A/CH	STATUS/EXIT CC	CLOCK
3 RD	2	TV/VCR
1		3
ACC
4	5	6
7	8	9	2
SMART		SM
	0
SOUND		PICTURE

MENU SURF

4

VOL CH

MUTE

Note: If a power failure occurs, the TV's

CLOCK will have to be reset.

If no time is set, the time will not appear onscreen.

8