Philips DVDR 77/00, DVDR 77/02 manual Problem solving for programmed recordings

Problem solving for programmed recordings

PROBLEMSOLUTION

ENGLISH

The DVD recorder is not responding

'Switch off, timer recording' flashes on the TV screen.

Error message: 'Insert recordable disc'

The error message

'Disc locked' appears briefly on the screen.

Error message: 'Memory full'

The 'Data error' message appears on the screen.

The 'Collision' message appears on the screen.

bWhile a programmed recording is being made, you cannot operate your DVD recorder manually. If you want to cancel the programmed recording, press STANDBY m .

bThe DVD recorder was switched on a few minutes before the start of a programmed recording. Switch off the DVD recorder using STANDBY m . A programmed recording (timer) will only function if the DVD recorder is switched off ( STANDBY m button).

bEither a disc has not been inserted or the disc cannot be used for recording. Insert a disc on which recordings can be made.

Search the position on the disc where you want the recording to begin. Switch off the DVD recorder using STANDBY m .

bA write-protected disc has been inserted. Undo the write protection (see 'Preventing accidental erasing of discs' in 'Manual recording') or insert a different disc.

bIf this error message appears after pressing TIMER s , then all TIMER blocks are already programmed. No more recordings can be programmed. Press the C button. If you want to clear or check a programmed recording (TIMER block), select it with A or B .

bThe data for the recording could not be transferred. Please check date, start time and finish time of the programmed recording.

bTwo programmed recordings overlap.

bIf you ignore this error message the show with the earlier start time will be recorded first. The start of the second show will not be recorded.

bChange the setting for either of the two recordings. bClear either of the two recordings

Programming a recording (TIMER) 91