User Manual BDS4621
Problem:Measures:
No Power
(Power indicator does not light)
‘No Input Signal’ message appears.
•Remove the power cable from the power outlet for 10 seconds, then
•Check that the signal line is connected properly.
•Check that the power of the relevant peripherals is turned on.
•Check that the Input option that has been selected matches the input signal.
The remote control does not work.
•Check the batteries for correct placement.
•Replace with new batteries.
•Check to make sure the Remote Control is within operating range.
•Check to make sure the Remote Control is pointed to the Remote Control Window on the Display.
•Check that there are no obstacles between the Remote Control and the Remote Control Window.
•For more information about the Remote Control, refer to Chapter Basic Operation.
Flashing spots or stripes appear • | Check that there is no emitter sources (Car, |
on the screen. | HV cable or Neon lamp) or other possible |
| interference sources. |
Image color or quality deteriorates.
•Check that all the video settings are adjusted appropriately, such as brightness, contrast, color etc.
•For more information about video settings, refer to ‘OSD Functions’ in the chapter ‘Basic Operation’.
Screen position and size are incorrect.
Image or color is incorrect.
•Check that the screen position and size is adjusted appropriately.
•Check that the signal line is connected properly.
•When connecting to a PC, you can change the resolution of PC to acquire correct image. The discrepancy of the PC output signal may affect the display of the image.
38