Philips 47PFL7403, 52PFL7403 Troubleshooting, General TV issues, Picture issues, Sound issues

Page 39

12 Troubleshooting

This section describes commonly-encountered issues and accompanying solutions.

12.1 General TV issues

The TV does not switch on:

Unplug the mains cord, wait for one minute and plug in the mains again.

Verify that the mains cord is properly connected and that the mains are powered.

The remote control is not working properly:

Verify that the remote control batteries are correctly inserted according to the +/- orientation.

Replace the remote control batteries if they are flat or weak.

Clean the remote control and TV sensor lens.

The standby light on the TV blinks red:

Turn off the TV and unplug the mains cord.Wait until the TV cools down before reinserting the mains cord and turning on the TV. If the blinking occurs again, contact our Customer Support Centre.

You forgot your code to unlock channels

Enter ‘0711’ as described in Section 5.6.3 Lock TV channels (Parental Lock).

The TV menu is in the wrong language

See Section 6 for instructions on how to change the TV menu to your preferred language.

12.2 Picture issues

There is sound but no picture:

Verify that picture settings are correctly set. See Section 5.3.1 Adjust picture settings.

Downloaded From TV-Manual.com Manuals

You receive poor TV reception from an antenna connection:

• Check that the antenna is properly

connected to the TV.

 

• Loud speakers, non-earthed audio devices,

 

neon lights, high buildings or mountains can

EN

influence the picture quality.Try to improve

 

the reception quality by changing the

 

antenna direction or moving devices away

 

from the TV.

 

• Verify if the correct TV system is selected

 

for your region.See Section 6.2 Manually

 

install channels.

 

• If reception on only one channel is poor,

 

try to fine tune this channel. See Section

 

6.2.1 Fine tune channels.

 

You receive poor picture quality from connected devices:

Check that the devices are connected properly. Also, be sure to assign devices to connectors as described in Section 7.4 Setup devices.

Verify that picture settings are correctly set. See Section 5.3.1 Adjust picture settings.

The TV did not save my settings:

Verify that the TV is set to the Home location, which offers you complete flexibility to change settings. See Section 6.4 Change to Shop or Home mode.

The picture does not fit the screen, it is too big or too small:

Try using a different picture format as described in Section 5.3.3 Change picture format.

Assign your device to connectors as described in Section 7.4 Setup devices.

12.3 Sound issues

There is picture but no sound from the TV:

EN-37

Image 39
Contents 上注册产品并获得支持 Page Table of contents EN-2 WarrantySafety Screen care Environmental careTV overview Your TVRemote control may differ according to TV model EN-6 Remote controlGet started Position the TVWall mount the TV BBNote Remove the TV stand DDNoteConnect cables Secure the VESA-compatible wall bracket to the TVLocate the TV Antenna connector at the back of the TV Connect the antenna cableConnect the mains cord Select your location Switch on the TVInsert the remote control batteries Manage cablesSwitch your TV on/off or to standby Use your TVWatch TV Adjust volume Watch connected devicesUse Ambilight Remote control overview Use more of your TVUse Demo mode Section Format Navigation Keys Navigates the menu Smart ModeDemo SurfUse TV menus Adjust picture and sound settings HD Natural Motion Use Smart ModePower Saver Artifacts ReductionSubtitle Zoom Adjust sound settingsSuper zoom Movie expandCreate a surf list Adjust Ambilight settingsTo delete a channel from the surf list Use timers and child lockAutomatically switch the TV to standby Sleep timer Automatically switch the TV on TimerTo lock one or more channels To set or change a PIN codeTo enter the Parental Lock menu To lock or unlock all channelsPress again to turn off a demo EN-22 Use Demo modeInstall channels Automatically install channelsManually install channels Manage channels Fine tune channelsReorder channels Shop Change to Shop or Home ModeName or rename channels Add or remove channels from your list of favouritesPress To exit EN-26 HomeConnection overview TV Antenna Aerial plug connectorSide connectors Connect devicesVideo Good quality Select connection qualityHdmi Highest quality Component YPbPr Higher qualityBlu-ray Disc player Connect devicesComposite Basic quality Indoor antennaGame console or camcorder DVD player/Home theatre systemDVD recorder 4 VCRSelect connectors Setup devicesConnecting to the back of the TV VGA Connecting to the side of the TV S-VideoUse your TV as PC monitor Configure PC modeUse your TV in High Definition HD mode Configure HD modeConfigure the TV in HD mode Non 1080p models Display in native 1080 modeSupported formats Press ey to exit the menuUse Philips EasyLink One-touch playOne-touch standby Technical data Sound issues TroubleshootingGeneral TV issues Picture issuesHdmi connection issues PC connection issuesContact us
Related manuals
Manual 41 pages 41.29 Kb Manual 50 pages 4.37 Kb Manual 46 pages 2.26 Kb Manual 46 pages 12.38 Kb Manual 42 pages 26.23 Kb Manual 46 pages 276 b Manual 46 pages 283 b

47PFL7403, 47PFL5403, 42PFL7603, 42PFL5403, 52PFL5403 specifications

The Philips 52PFL5403, 42PFL7403, 42PFL5203, 42PFL5403, and 42PFL7603 are part of Philips' line of LCD TVs that exemplify the brand's commitment to delivering high-quality visuals and user-friendly features. Each model offers a unique blend of technology and design, catering to a range of viewing preferences.

At the core of these models is Philips' advanced pixel processing technology, which enhances picture quality by improving detail and reducing noise. This feature ensures that viewers experience sharp and vibrant images, making it an excellent choice for watching movies or playing video games. The Dynamic Contrast feature found in these models further enhances the viewing experience by adjusting the brightness of the image in real-time, resulting in deeper blacks and brighter whites.

One of the standout features across these models is their enhanced connectivity options. Each TV is equipped with multiple HDMI ports, allowing users to easily connect various devices such as Blu-ray players, gaming consoles, and sound systems. Additionally, they support USB ports for easy playback of media from external drives, making it simple to enjoy photos, videos, or music directly on the screen.

In terms of design, the Philips 52PFL5403 and its smaller counterparts, such as the 42PFL7403, showcase a sleek and modern aesthetic that fits seamlessly into any living space. With a thin profile and minimal bezels, these TVs provide an immersive viewing experience by maximizing the screen area.

Moreover, the inclusion of Ambilight technology in select models, like the 42PFL7603, enhances the overall ambiance of the room. This feature projects light onto the walls surrounding the TV, creating a more immersive and engaging viewing environment, especially in darkened conditions.

These TVs also include various picture modes, allowing users to customize image settings to suit their preferences, whether it be for sports, cinema, or standard viewing. The intuitive user interface further enhances the experience, making navigation through settings and content quick and straightforward.

In summary, the Philips 52PFL5403, 42PFL7403, 42PFL5203, 42PFL5403, and 42PFL7603 offer a compelling mix of advanced technology, connectivity, and stylish design. Their range of features ensures that they can meet the demands of diverse users, from casual viewers to dedicated cinephiles. With Philips' commitment to quality and innovation, these models are poised to deliver an exceptional viewing experience.