Philips 50PF9630A 50 Press the cursor right to enter the overriding PIN code, Menu preferences

Note: Emergency Alert Signalling is not possible:

-when content browsing;

-with analogue video sources.

Notes:

-You always have the possibility to remove the message from the screen.

-The message display will overlap whatever menu element or other message is on the screen.

Important: you have forgotten your PIN!

&Select Change PIN in the Menu preferences menu and press the cursor right.

éPress the cursor right to enter the overriding PIN code 0-7-1-1.

“Press the cursor again and enter a new personal 4-digit PIN code. The previous code is erased an the new PIN-code is stored.

Menu preferences

OSD

&Select OSD.

éPress the cursor right to select Normal or Minimum.

Normal to activate the continuous display of the channel number (for max. 10 minutes) and extended display of TV channel and program information on screen. E.g. information on the main or auxiliary program, input signal quality of connected accessory devices, the display format, sound mode, availability of Closed Caption service, the audio language, the rating, sleeptimer setup.

Minimum to activate the display of reduced channel information. Note: When Closed Captions is switched on, continuous display of the channel number and clock is not possible.

Show emergency alerts (EAS)

This allows you to select the alert priority level of the information disseminated by the cable operator. The standard SCTE18 defines an Emergency Alert signalling method for use by cable TV systems to signal emergencies to digital devices such as digital set-top boxes, digital TVs and digital VCRs.

The Emergency alert signalling scheme defined in the standard allows a cable operator to disseminate emergency alert information related to state and local-level emergencies and warnings in a cost-effective and efficient way, while minimizing disruption of programming.

An Emergency alert message will have one of the following priorities: Low, Medium, High or Maximum.

The Emergency alert message with priority High or Maximum will always be presented. Low or Medium will be present or ignored depending on the selected setting.

Important: When the TV clock is undefined (See Setup menu, Clock, p. 17), the Emergency Alerts will be ignored.

The Emergency Alert message display will contain following information:

-The Emergency Alert text

-The start time + date

-The end time + date.

&Select Show Emergency Alerts in the Menu preferences menu.

éPress the cursor right and select one of the Emergency alerts options:

-Always, when you always want the Emergency alert messages to be displayed when available;

-Skip low priority, when you want the messages with low level to be ignored;

-Skip low/medium priority, when you only want the messages with high priority to be displayed.

Set/Change PIN

&Select Set or Change PIN with the cursor down.

éIf no PIN-code exists yet, the menu item is set to Set PIN. Follow the instructions on screen.

If a PIN-code has previously been entered, the menu item is set to Change PIN. Follow the instructions on screen.

All number combinations from 0000 tot 9999 are valid numbers.

“The Features preferences menu reappears with a message confirming that the PIN has been created.

Reset AV settings

This function allows you to reset most of the picture and sound settings to their predefined factory states.

&Select Reset AV settings with the cursor down.

éPress the cursor right.

“Press the OK button to erase settings and reset them to their default values.

15