If you entered a known code, all universal mode keys will blink to confirm the selection. If you entered an unknown code, all universal mode keys will light up for 2 seconds. Repeat Step 2 with a different code.
ÒPoint the remote control at the device, and press B to test if the code is known for your device.
If successful try whether you can operate all functions. If not successful, or if you cannot operate all functions, repeat Step 1 and 2 with one of the other setup codes for your brand.
Method 3:Automatic search of all codes
If you are not successful to find the known brand or code, try an automatic search of all codes. The automatic search can take several minutes.
If after the automatic search no code is successful, it is not possible to operate your particular device with the remote control. In such case, use the device's own remote control.
‡Turn on the device you want the TV remote
control to set up for.
®. Point the remote control to the device during the automatic search.
ÒTo select the universal mode you need, press the DVD, STB or HTS key and the OK key at the same time for 4 seconds.
The selected universal mode lights up constantly.
†Press OK to start the automatic search. Every two seconds, when a new code is sent, the B key will blink.
Keep pointing the remote control to the device.
ºWhen the device switches off, press OK to stop the search.
◊Press B to switch on your device.
‹Press the remote control keys to try if you can operate all functions. If you cannot operate all functions, press OK again to continue the automatic search for a correct code.
≈If you can operate all functions, press the currently selected universal mode key to confirm and to quit the automatic search.
rNote:
To pause the automatic search, press OK. Press o or œ to search for the codes one by one backward or forward to locate the known code for your device or press OK again to continue the automatic search.
5.1.4Keep the remote control in the
chosen universal mode permanently
If you press the DVD, STB or HTS key the remote control can operate other devices. When no key is pressed for 30 seconds the remote control switches back to normal TV.
You can set the remote control to hold a universal mode as long as no other universal mode is pressed. This disables the 30 seconds switch back to normal TV.
‡Press the TV key.
®Press OK and ¬ at the same time for 4 seconds. The B key lights up for 2 seconds.
From now on the remote control will not switch back to normal TV mode.
To return to the 30 seconds switch back to normal TV mode, follow the same steps 1 and 2.
5.1.5Device functions overview
When the remote control is set for a particular device all keys have the same function except the keys mentioned here.
•DVD player
Menu key = DVD Disc menu P+/- = DVD Next/Previous track
•DVD Recorder
Òkey =
†key =
•DVD recorder with Hard Disc Drive Menu key =
Òkey =
†key =
•
a key = BD Content menu Menu key = BD Disc menu
Downloaded From | Use more of your TV |
14 |