6 Install channels
The rst time you set up yourTV, you are prompted to select a menu language and to installTV and digital radio channels (if available). This chapter provides instructions on how to
Automatically install channels
This section describes how to search and store channels automatically.
1Press MENU.
2Select [Setup] > [Installation] > [Channel install.] > [Channel assistant].
3Press OK.
4Follow the
Manually install channels
This section describes how to search and store analogueTV channels manually.
Step 1 Select your system
Note
•Skip this step if your system settings are correct.
1Press MENU.
2Press to select[Setup] > [Installation]
>[Channel install.] > [Manual install]. » The [Manual install] menu appears.
3Press to select [Colour system], then press to enter.
4Select your system, then press OK to con rm.
5Repeat the previous steps for [Sound system].
6Press MENU to exit.
Step 2 Search and store new TV channels
1Press MENU.
2Press to select [Setup] > [Installation] > [Channel install.] >
[Manual install].
» The [Manual install] menu appears.
3Press to select [Search], then press to enter.
4Press Numeric buttons to manually enter the
5Press OK to begin search.
»If a channel is unavailable at the selected frequency, the system searches for the next available channel.
6Press BACK when the new channel is found.
7Press to select [Store new channel] to store the new channel under a new channel number.
8Press to enter [Store new channel].
9Select [OK], then press OK to store the new channel.
10 Press MENU to exit.
Step 3 Fine-tune analogue channels
1Press MENU.
2Press to select [Setup] > [Installation] > [Channel install.] >
[Manual install].
» The [Manual install] menu appears.
3Press to select
to enter.
4Press to adjust frequency.
5Press OK to con rm.
6Press to select [Store curr. chan.] to store the channel number.
7Press to enter [Store curr. chan.].
8Select [OK], then press OK to store current channel.
9Press MENU to exit.
English
EN 17