Using Remote Control function
■Mute, freezing and playback
Mute setting | In case an important guest visits you or you receive |
| an incoming call while watching TV program, you can |
| simply press the Mute key on the remote control to turn |
| off the sound of TV program.Pressing the "Mute" key or |
| the Vol + key again may restore the sound. |
| Notice: |
| 1. When pressing the Vol- key in the Mute mode, the value of |
| volume decreases, however it is still in the mute display. |
| 2. After it is muted, any other operations of the TV set can be |
| carried out in the mute mode. |
| 3. If you press the On/Off to enter the standby mode or disconnect |
| the AC power supply, the TV set will exit the mute mode after |
| being turned on again. |
| 4. If no other operations are made, the mute indication is always |
| displayed. |
Playback function The quick playback function enables you to quickly access the TV channel you watched the last time.
1.Assuming the number of the TV channel you watched just now is "8", and the number of the channel you are watching now is "18" (as shown in the right diagram).
2. If you want to go back to Channel 8 you watched just now, simply press the Playback key.
3. If you want to go back to Channel 18 immediately, simply press the Playback key again.
Notice:
This function needs to be enabled in TV signal mode.
25