Philips 42TA648BX user manual Manage cables, Switch on and setup the TV, EN-9

3.5Manage cables

Route your power cord, antenna cable and all other device cables through the cable holder at the back of the TV. This holder helps keep your cables tidy and easily manageable.

3.6Switch on and setup the TV

The TV switches on automatically after connecting the power cord.

Thank you for your purchase of this PHILIPS TV.

Please proceed with the following steps to set-up your TV. For the BEST possible picture performance, contact your local Cable / Satellite signal provider for High Definition signal options available in your area.

Next

Press the GREEN Next button located on your remote control to proceed.

Follow the on-screen instructions to select your language and complete your TV setup. Installation takes approximately 10 minutes.

D Note: If you connect your TV to a cable box or satellite set-top box, you do not need to install channels. Press the red button on the remote control to exit the channel installation stage of the setup.

Finish the setup by selecting your location:

•If you choose Retail store your settings will be are erased each time you turn off the TV. This mode is only to be used for retail store displays.

•If you choose Home you are guided through a choice of picture display options. Use the left and right cursor to select your preferred screen.

ESPAÑOL FRANÇAISE ENGLISH

EN-9